Install Ajenti (A Web Based Control Panel) for Managing Linux Server

Ajenti is an open source web based system management control panel for managing remote system administrating tasks from the web browser much similar to Webmin module. Ajenti is a much powerful and lightweight tool, that provides fast and responsive web interface for managing small server set-ups and also best suitable for VPS and Dedicated servers. It has built with many pre-made plugins for configuring and monitoring server software’s and services such as Apache, Cron, File System, Firewall, MySQL, Nginx, Munin, Samba, FTP, Squid and many other tools like File Manager, Code Editor for developers and Terminal access.

Install Ajenti Control Panel
Install Ajenti Control Panel

In this article we’re going to show you how we going to install Ajenti Server Manager tool on RHEL 6.4/6.3/6.2/6.1/6/5.8, CentOS 6.4/6.3/6.2/6.1/6/5.8, Fedora 19/18/17/16/15/14/13/12, Ubuntu 13.04/12.10/12.04/11.10, Linux Mint 15/14/13/12 and Debian Sid, Debian Wheezy and Debian Squeeze systems using own ajenti repository.

Installing Ajenti On RHEL/CentOS and Fedora

Ajenti is a third party tool and requires EPEL repositories to be enabled on our system to install dependency packages. Use the given link to install it.

  1. Enable EPEL Repositories

Once enabled, now we can move further to download and install Ajenti’s official repository using “wget” command. If you don’t have “wget” package, install using “yum install wget“.

# wget
# rpm -i ajenti-repo-1.0-1.noarch.rpm

Install the package using “YUM” package manager tool.

# yum install ajenti

Once installation finishes, open “8000” port on firewall/router for remote access of web interface. Open the following file with VI editor.

# vi /etc/sysconfig/iptables

Append the following two lines at the bottom of the file, save and close it.

-A INPUT -p udp -m state --state NEW --dport 8000 -j ACCEPT 
-A INPUT -p tcp -m state --state NEW --dport 8000 -j ACCEPT

Next, restart iptables service.

# service iptables restart

Installing Ajenti On Ubuntu/Debian and Linux Mint

As I said above, Ajenti is not included in the default repository, it needs to be added. So, let’s download and add the ajenti PPA repository to “/etc/apt/sources“.list.

# wget -O- | apt-key add -
# echo "deb main main" >> /etc/apt/sources.list

Once PPA added, update the system and then install the package.

# apt-get update && apt-get install ajenti

To verify, open a web browser and type the IP of the server where we’ve installed Ajenti and enter default username “admin”  or “root” and password is “admin“.

Login Screen
Ajenti Login Screen
Ajenti Login Screen
Ajenti Dashboard
Ajenti Plugins
Ajenti Plugins
Ajenti File System
Ajenti Firewall
System Packages
Ajenti Package Manager
Running Processes
Ajenti Processes
Linux Running Processes
File Manager
Ajenti File Manager
Linux File Manager
Running Services
Ajenti Services
Linux Services

Reference Link

Ajenti Homepage

If you liked this article, then do subscribe to email alerts for Linux tutorials. If you have any questions or doubts? do ask for help in the comments section.

If You Appreciate What We Do Here On TecMint, You Should Consider:

TecMint is the fastest growing and most trusted community site for any kind of Linux Articles, Guides and Books on the web. Millions of people visit TecMint! to search or browse the thousands of published articles available FREELY to all.

If you like what you are reading, please consider buying us a coffee ( or 2 ) as a token of appreciation.

Support Us

We are thankful for your never ending support.

49 thoughts on “Install Ajenti (A Web Based Control Panel) for Managing Linux Server”

  1. Ravi, great tutorial. Thank you.

    But, unfortunately during install i got this error: [Errno -1] Package does not match intended download

    If someone encountered this error as well you should execute the following command as noted in
    yum clean metadata

    After that, it works.

  2. hi
    i was install ajenti on centos 6.5 minimal and the part of my iptables is:
    -A INPUT -p icmp -j ACCEPT
    -A INPUT -i lo -j ACCEPT
    -A INPUT -m state –state NEW -m tcp -p tcp –dport 22 -j ACCEPT
    -A INPUT -m state –state NEW -m tcp -p tcp –dport 8000 -j ACCEPT
    -A INPUT -m state –state NEW -m udp -p udp –dport 8000 -j ACCEPT
    -A INPUT -j REJECT –reject-with icmp-host-prohibited
    -A FORWARD -j REJECT –reject-with icmp-host-prohibited
    but when i try to access web with port 8000 i dont have this
    please help me for solve this problem
    my 8000 port is open and in listening.

  3. Hi Guys,

    I have very bad experience with Ajenti, I will recommend you not to use this product, I installed it on debian wheezy VPS server. After one week, it start broadcasting data from server. I got to know about this after three days when my VPS provider sent me a mail that you VPS has consumed data bandwidth of 180 GB in just three days, youneed to check the server.

    When I check this then I uninstalled this and data broadcasting stop after it. For security reason I have to configure whole server from start after reset up vps from vps provider.

    So again, I will not suggest anybody to use this.

    Amit Bondwal

  4. Hi greetings of the day
    am trying to install ajenti in ubuntu usinng server..

    i done with all settings and i open 8000 port number in firewall but also am unable to get web page on :8000 getting error as Webpage is not available


Leave a Reply to Ravi Saive Cancel reply

Have a question or suggestion? Please leave a comment to start the discussion. Please keep in mind that all comments are moderated and your email address will NOT be published.

This site uses Akismet to reduce spam. Learn how your comment data is processed.