How to Install and Setup Monit (Linux Process and Services Monitoring) Program

Monit is a free open source and very useful tool that automatically monitors and manages server process, files, directories, checksums, permissions, filesystems and services like Apache, Nginx, MySQL, FTP, SSH, Sendmail and so on in a UNIX/Linux based systems and provides an excellent and helpful monitoring functionality to system administrators.

The monit has user friendly web interface where you can directly view the system status and setup up processes using native HTTP(S) web server or via the command line interface. This means you must have web server like Apache or Nginx installed on your system to access and view monit web interface.

Read Also : 10 Linux Performance Monitoring Tools

What Monit can do

Monit has a ability to start a process if it is not running, restart a process if not responding and stop a process if uses high resources. Additionally you can also use Monit to Monitor files, directories and filesystems for changes, checksum changes, file size changes or timestamp changes. With Monit you can able to monitor remote hosts TCP/IP port, server protocols and ping. Monit keeps its own log file and alerts about any critical error conditions and recovery status.

This article is written to describe a simple guide on Monit installation and configuration on a RHEL, CentOS, Fedora, Ubuntu, Linux Mint and Debian Linux Operating Systems, but it should be easily compatible to Scientific Linux as well.

Step 1: Installing Monit

By default, Monit tool is not available from the system base repositories, you need to add and enable third party epel repository to install monit package under your RHEL/CentOS systems. Once you’ve added epel repository, install package by running the following yum command. For Ubuntu/Debian/Linux Mint user’s can easily install using apt-get command as shown.

On RedHat/CentOS/Fedora/
# yum install monit
On Ubuntu/Debian/Linux Mint
$ sudo apt-get install monit

Step 2: Configuring Monit

Monit is very easy to configure, in fact the configuration files are created to be very easily readable and making them easier for users to understand. It is designed to monitor the running services in every 2 minutes and keeps the logs in “/var/log/monit“.

Monit has it’s web interface that runs on port 2812 using web server. To enable web interface you need to make changes in monit configuration file. The main configuration file of monit located at /etc/monit.conf under (RedHat/CentOS/Fedora) and /etc/monit/monitrc file for (Ubuntu/Debian/Linux Mint). Open this file using your choice of editor.

# vi /etc/monit.conf
$ sudo vi /etc/monit/monitrc

Next, uncomment the following section and add the IP address or domain name of your server, allow anyone to connect and change monit user and password or you can use default ones.

 set httpd port 2812 and
     use address localhost  # only accept connection from localhost
     allow localhost        # allow localhost to connect to the server and
     allow admin:monit      # require user 'admin' with password 'monit'
     allow @monit           # allow users of group 'monit' to connect (rw)
     allow @users readonly  # allow users of group 'users' to connect readonly

Once you’ve configured it, you need to start the monit service to reload the new configuration settings.

# /etc/init.d/monit start
$ sudo /etc/init.d/monit start

Now, you will able to access the monit web interface by navigating to the “http://localhost:2812” or ““. Then enter user name as “admin” and password as “monit“. You should get screen similar to below.

Install Monit in Fedora

Monit Web Interface

Step 3: Adding Monitoring Services

Once monit web interface correctly setup, start adding the programs that you want to monitor into the /etc/monit.conf under (RedHat/CentOS/Fedora) and /etc/monit/monitrc file for (Ubuntu/Debian/Linux Mint) at the bottom.

Following are some useful configuration examples for monit, that can be very helpful to see how a service is running, where it keeps its pidfile and how to start and stop a service etc.

check process httpd with pidfile /var/run/
group apache
start program = "/etc/init.d/httpd start"
stop program = "/etc/init.d/httpd stop"
if failed host port 80
protocol http then restart
if 5 restarts within 5 cycles then timeout
check process apache with pidfile /run/
start program = "/etc/init.d/apache2 start" with timeout 60 seconds
stop program  = "/etc/init.d/apache2 stop"
check process nginx with pidfile /var/run/
start program = "/etc/init.d/nginx start"
stop program = "/etc/init.d/nginx stop"
check process mysqld with pidfile /var/run/mysqld/
group mysql
start program = "/etc/init.d/mysqld start"
stop program = "/etc/init.d/mysqld stop"
if failed host port 3306 then restart
if 5 restarts within 5 cycles then timeout
check process sshd with pidfile /var/run/
start program "/etc/init.d/sshd start"
stop program "/etc/init.d/sshd stop"
if failed host port 22 protocol ssh then restart
if 5 restarts within 5 cycles then timeout

Once you’ve configured all programs for monitoring, check monit syntax for errors. If found any errors fix them, it’s not so tough to figure out what’s went wrong. When you get message like “Control file syntax OK“, or if you see no errors, you can proceed ahead.

# monit -t
$ sudo monit -t

After fixing all possible errors, you can type the following command to start the monit service.

# /etc/init.d/monit restart
$ sudo /etc/init.d/monit restart

You can verify that monit service is started by checking log file.

# tail -f /var/log/monit
$ sudo tail -f /var/log/monit.log
Sample Output
[BDT Apr  3 03:06:04] info     : Starting monit HTTP server at [localhost:2812]
[BDT Apr  3 03:06:04] info     : monit HTTP server started
[BDT Apr  3 03:06:04] info     : '' Monit started
[BDT Apr  3 03:06:04] error    : 'nginx' process is not running
[BDT Apr  3 03:06:04] info     : 'nginx' trying to restart
[BDT Apr  3 03:06:04] info     : 'nginx' start: /etc/init.d/nginx
Monit Screenshot

This is how looks monit after adding all process for monitoring.

Monit Monitoring Process

Monit Monitoring All Process

Reference Links

  1. Monit Home Page
  2. Monit Documentation
  3. Monit Configuration Examples

If You Appreciate What We Do Here On TecMint, You Should Consider:

TecMint is the fastest growing and most trusted community site for any kind of Linux Articles, Guides and Books on the web. Millions of people visit TecMint! to search or browse the thousands of published articles available FREELY to all.

If you like what you are reading, please consider buying us a coffee ( or 2 ) as a token of appreciation.

Support Us

We are thankful for your never ending support.

Ravi Saive

I am Ravi Saive, creator of TecMint. A Computer Geek and Linux Guru who loves to share tricks and tips on Internet. Most Of My Servers runs on Open Source Platform called Linux. Follow Me: Twitter, Facebook and Google+

Your name can also be listed here. Got a tip? Submit it here to become an TecMint author.

RedHat RHCE and RHCSA Certification Book
Linux Foundation LFCS and LFCE Certification Preparation Guide
The Complete Linux System Administrator Bundle
Become an Ethical Hacker Bonus Bundle

You may also like...

45 Responses

  1. Abhishek says:


    Can you please tell me how to send alert through monit if someone ssh server.


  2. Stefan says:

    Is monit able to monitor logging of services?

    For instance, if a service hangs (stops logging) but the process is still running so it still has a pid. Will it be able to monitor that and force a kill on the pid and initiate a restart?

    • Ravi Saive says:

      It’s just a monitoring tool that monitors and alerts about the services which are in critical state, it doesn’t take any actions like you saying, you’ve to kill and restart manually..

  3. ejaz says:

    can you send me step by step installation monit. on Ubuntu 12.04 32 desktop

  4. Jean says:

    Hi Ravi,

    Thx for this post. It really helps. i’m using Ubuntu 12.10 server, and i was wondering if it should be “mysql” instead of “mysqld” on the third and fourth row for the MySql monitoring services :

    check process mysqld with pidfile /var/run/mysqld/
    group mysql
    start program = “/etc/init.d/mysqld start”
    stop program = “/etc/init.d/mysqld stop”
    if failed host port 3306 then restart
    if 5 restarts within 5 cycles then timeout

    Because when i use “mysqld” an error occur.

    thx a lot

  5. Al says:

    I am unable to access the webUI page and the message I am getting is “The connection was interrupted”and firewall is disabled already. below is my configuration:

    set httpd port 2812 and
    use address # only accept connection from localhost
    allow # allow localhost to connect to the server and
    allow admin:monit # require user ‘admin’ with password ‘monit’
    allow @monit # allow users of group ‘monit’ to connect (rw)
    allow @users readonly # allow users of group ‘users’ to connect readonly

    Any help would be appreciated

  6. Mann says:

    check system is not working for the remote host neither the running services are showing up in Monit window

  7. Mann says:

    how to monitor windows machine with monit ???

  8. Brent says:

    Very nice. I’m quite new to linux and this tutorial got me through the basics without getting bogged down in all the different things that you can use monit for.
    I appreciated you specifying the commands for the different linux versions. Often tutorials on websites assume you are using a certain flavor of linux, but never mention what that flavor is.

  9. imran says:

    I have written an article for moit and mmonit, to control your monit instance through web interface. hope this will help some one.

  10. feroz says:

    how to install it on server i have logged into my server using ssh, installed the monit , the monit status command showing everything fine in the ssh console,but i am unable to access the web panel from browser as nothing happes just keep on loading

Got something to say? Join the discussion.

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.