How to Create a Centralized Log Server with Rsyslog in CentOS/RHEL 7

In order for system administrator to identify or troubleshoot a problem on a CentOS 7 or RHEL 7 server system, it must know and view the events that happened on the system in a specific period of time from log files stored in the system in the /var/log directory.

The syslog server on a Linux machine can act a central monitoring point over a network where all servers, network devices, routers, switches and most of their internal services that generate logs, whether related to specific internal issue or just informative messages can send their logs.

On a CentOS/RHEL 7 system, Rsyslog daemon is the main log server preinstalled, followed by Systemd Journal Daemon (journald).

Rsyslog server in build as a client/server architecture service and can achieve both roles simultaneous. It can run as a server and collect all logs transmitted by other devices in the network or it can run as a client by sending all internal system events logged to a remote endpoint syslog server.

When rsyslog is configured as a client, the logs can be stored locally in files on the local filesystem or can be send remotely rather than write them in files stored on the machine or write events log files locally and send them to a remote syslog server at the same time.

Syslog server operates any log message using the following scheme:

type (facility).priority (severity)  destination(where to send the log)

A. The facility or type data is represented by the internal system processes that generates the messages. In Linux internal processes (facilities) that generate logs are standardized as follows:

  • auth = messages generated by authentication processes (login).
  • cron= messages generated by scheduled processes (crontab).
  • daemon = messages generated by daemons (internal services).
  • kernel = messages generated by the Linux Kernel itself.
  • mail = messages generated by a mail server.
  • syslog = messages generated by the rsyslog daemon itself.
  • lpr = messages generated by local printers or a print server.
  • local0 – local7 = custom messages defined by an administrator (local7 is usually assigned for Cisco or Windows).

B. The priority (severity) levels are standardized also. Each priority is assigned with a standard abbreviation and a number as described below. The 7th priority is the higher level of all.

  • emerg = Emergency – 0
  • alert = Alerts – 1
  • err = Errors – 3
  • warn = Warnings – 4
  • notice = Notification – 5
  • info = Information – 6
  • debug = Debugging – 7

Special Rsyslog keywords:

  • * = all facilities or priorities
  • none = the facilities have no given priorities Eg: mail.none

C. The third part for the syslog schema is represented by the destination directive. Rsyslog daemon can send log messages to be written in a file on the local filesystem (mostly in a file in /var/log/ directory) or to be piped to another local process or to be send to a local user console (to stdout), or send the message to a remote syslog server via TCP/UDP protocol, or even discard the message to /dev/null.

In order to Configure CentOS/RHEL 7 as a central Log Server, first we need to check and ensure that the /var partition where all log file are recorded is large enough (a few GB minimum) in order to be able to store all the log files that will be sent by other devices. It’s a good decision to use a separate drive (LVM, RAID) to mount the /var/log/ directory.

Requirements

  1. CentOS 7.3 Installation Procedure
  2. RHEL 7.3 Installation Procedure

How to Configure Rsyslog in CentOS/RHEL 7 Server

1. By default, Rsyslog service is automatically installed and should be running in CentOS/RHEL 7. In order to check if the daemon is started in the system, issue the following command with root privileges.

# systemctl status rsyslog.service
Check Rsyslog Service

Check Rsyslog Service

If the service is not running by default, execute the below command in order to start rsyslog daemon.

# systemctl start rsyslog.service

2. If the rsyslog package is not installed on the system that you intend to use as a centralized logging server, issue the following command to install the rsyslog package.

# yum install rsyslog

3. The first step that we need to do on the system in order to configure rsyslog daemon as a centralized log server, so it can receive log messages for external clients, is to open and edit, using your favorite text editor, the main configuration file from /etc/rsyslog.conf, as presented in the below excerpt.

# vi /etc/rsyslog.conf

In the rsyslog main configuration file, search and uncomment the following lines (remove the hashtag # sign at the line beginning) in order to provide UDP transport reception to Rsyslog server via 514 port. UDP is the standard protocol used for log transmission by Rsyslog.

$ModLoad imudp 
$UDPServerRun 514
Configure Rsyslog Server

Configure Rsyslog Server

4. UDP protocol does not have the TCP overhead, which make it faster for transmitting data than TCP protocol. On the other hand, UDP protocol does not assure reliability of transmitted data.

However, if you need to use TCP protocol for log reception you must search and uncomment the following lines from /etc/rsyslog.conf file in order to configure Rsyslog daemon to bind and listen a TCP socket on 514 port. TCP and UDP listening sockets for reception can be configured on a Rsyslog server simultaneously.

$ModLoad imtcp 
$InputTCPServerRun 514 

5. On the next step, don’t close the file yet, create a new template that will be used for receiving remote messages. This template will instruct the local Rsyslog server where to save the received messages send by syslog network clients. The template must be added before the beginning of the GLOBAL DIRECTIVES block as illustrated in the below excerpt.

$template RemoteLogs,"/var/log/%HOSTNAME%/%PROGRAMNAME%.log" 
. ?RemoteLogs & ~
Create Rsyslog Template

Create Rsyslog Template

The above $template RemoteLogs directive instructs Rsyslog daemon to collect and write all of the received log messages to distinct files, based on the client machine name and remote client facility (application) that generated the messages based on the defined properties presents in the template configuration: %HOSTNAME% and %PROGRAMNAME%.

All these log files will be written to local filesystem to a dedicated file named after client machine’s hostname and stored in /var/log/ directory.

The & ~ redirect rule instructs the local Rsyslog server to stop processing the received log message further and discard the messages (not write them to internal log files).

The RemoteLogs name is an arbitrary name given to this template directive. You can use whatever name you can find best suited for your template.

In order to write all received messages from clients in a single log file named after the IP Address of the remote client, without filtering the facility that generated the message, use the below excerpt.

$template FromIp,"/var/log/%FROMHOST-IP%.log" 
. ?FromIp & ~ 

Another example of a template where all messages with auth facility flag will be logged to a template named “TmplAuth“.

$template TmplAuth, "/var/log/%HOSTNAME%/%PROGRAMNAME%.log" 
authpriv.*   ?TmplAuth

Below is an excerpt form a template definition from Rsyslog 7 server:

template(name="TmplMsg" type="string"
         string="/var/log/remote/msg/%HOSTNAME%/%PROGRAMNAME:::secpath-replace%.log"
        )

The above template excerpt can also be written as:

template(name="TmplMsg" type="list") {
    constant(value="/var/log/remote/msg/")
    property(name="hostname")
    constant(value="/")
    property(name="programname" SecurePath="replace")
    constant(value=".log")
    }

To write complex Rsyslog templates, read the Rsyslog configuration file manual by issuing man rsyslog.conf command or consult Rsyslog online documentation.

6. After you’ve edited the Rsyslog configuration file with your own settings as explained above, restart the Rsyslog daemon in order to apply changes by issuing the following command:

# service rsyslog restart

7. By now, Rsyslog server should be configured to act a centralized log server and record messages from syslog clients. To verify Rsyslog network sockets, run netstat command with root privileges and use grep to filter rsyslog string.

# netstat -tulpn | grep rsyslog 
Verify Rsyslog Network Socket

Verify Rsyslog Network Socket

8. If you have SELinux enabled in CentOS/RHEL 7, issue the following command to configure SELinux to allow rsyslog traffic depending on network socket type.

# semanage -a -t syslogd_port_t -p udp 514
# semanage -a -t syslogd_port_t -p tcp 514 

9. If the firewall is enabled and active, run the below command in order to add the necessary rules for opening rsyslog ports in Firewalld.

# firewall-cmd --permanent --add-port=514/tcp
# firewall-cmd --permanent --add-port=514/udp
# firewall-cmd –reload

That’s all! Rsyslog is now configured in server mode and can centralize logs from remote clients. In next article, we will see how to configure Rsyslog client on CentOS/RHEL 7 server.

Using Rsyslog server as a central monitoring point for remote log messages you can inspect log files and observe the clients health status or debug client’s issues more easily when systems crash or are under some kind of attack.

If You Appreciate What We Do Here On TecMint, You Should Consider:

TecMint is the fastest growing and most trusted community site for any kind of Linux Articles, Guides and Books on the web. Millions of people visit TecMint! to search or browse the thousands of published articles available FREELY to all.

If you like what you are reading, please consider buying us a coffee ( or 2 ) as a token of appreciation.

Support Us

We are thankful for your never ending support.

Matei Cezar

I'am a computer addicted guy, a fan of open source and linux based system software, have about 4 years experience with Linux distributions desktop, servers and bash scripting.

Your name can also be listed here. Got a tip? Submit it here to become an TecMint author.

RedHat RHCE and RHCSA Certification Book
Linux Foundation LFCS and LFCE Certification Preparation Guide

You may also like...

20 Responses

  1. Gator Nation says:

    Has anyone created a logging server on CentOS 8 yet? The rsyslog.conf file is very different. Thanks

  2. faran mustafa says:

    how to creat a folder in syslog where all log are come

  3. Brian Weslowski says:

    In step 8, your semanage command is incorrect as of RHEL/CentOS 7.4. The correct command is: semanage port -a -t syslog_port_t -p udp 514. You are missing the first “port” option.

    Also, if you are using a basic install of RHEL/CentOS, you need to install semanage with: yum install policycoreutils-python.

  4. Red Cricket says:

    If I set up rsyslog server how can I set it up so that only certain clients can send log messages to it?

Leave a Reply to Gator Nation Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.