2 Ways to Create an ISO from a Bootable USB in Linux

In this article, we will show you how to create an ISO from a bootable USB drive in Linux. We will explain two ways to achieve this: via the command line interface (CLI) and a graphical user interface (GUI) program.

Create An ISO From A Bootable USB Drive Using dd Tool

dd is a commonly used command-line tool for Linux and other Unix-like operating systems, used to convert and copy files.

To create an ISO image from a Bootable USB Drive files, first you need to insert your USB drive and then find the device name of your USB using following df command.

$ df -hT
Sample Output
Filesystem     Type      Size  Used Avail Use% Mounted on
udev           devtmpfs  3.9G     0  3.9G   0% /dev
tmpfs          tmpfs     787M  1.5M  786M   1% /run
/dev/sda3      ext4      147G   28G  112G  20% /
tmpfs          tmpfs     3.9G  148M  3.7G   4% /dev/shm
tmpfs          tmpfs     5.0M  4.0K  5.0M   1% /run/lock
tmpfs          tmpfs     3.9G     0  3.9G   0% /sys/fs/cgroup
/dev/sda1      vfat      299M   11M  288M   4% /boot/efi
tmpfs          tmpfs     787M   56K  787M   1% /run/user/1000
/dev/sda5      ext4      379G  117G  242G  33% /media/tecmint/Data_Storage
/dev/sdb1 iso9660 1.8G 1.8G 0 100% /media/tecmint/Linux Mint 19 Xfce 64-bit

From the output above, you can clearly see that our attached USB device name is /dev/sdb1.

Now you can run the following command to create an ISO from a bootable USB drive as shown. Make sure to replace /dev/sdb1 with your USB drive and /home/tecmint/Documents/Linux_Mint_19_XFCE.iso with the full name of the new ISO image.

$ sudo dd if=/dev/sdb1 of=/home/tecmint/Documents/Linux_Mint_19_XFCE.iso

In the above command, the option:

  • if – means read from specified FILE instead of stdin.
  • of – means write to specified FILE instead of stdout.

Once done, you can verify the ISO image using following ls command as shown.

$ ls -l /home/tecmint/Documents/Linux_Mint_19_XFCE.iso
Create ISO from Bootable USB Using dd Command

Create ISO from Bootable USB Using dd Command

Create An ISO From A Bootable USB Drive Using Gnome Disks

Gnome Disks is a graphical tool used to manage disk drives and media in Linux. It is used to format and partition drives, mount and unmount partitions, and query S.M.A.R.T. (Self-Monitoring Analysis and Reporting Technology) attributes.

If you don’t have gnome-disk utility on your system, you can install it by running the following command.

$ sudo apt install gnome-disk-utility        #Ubuntu/Debian
$ sudo yum install gnome-disk-utility        #CentOS/RHEL
$ sudo dnf install gnome-disk-utility        #Fedora 22+

After successfully installing Gnome disk, search and open it from the system menu or dash. Then from the default interface, select the bootable device from the list of mounted devices on the left-hand pane, by clicking on it and click on disk options. Then click on Create Disk Image option as shown in the following image.

Create a Disk Partition Image

Create a Disk Partition Image

From the dialog window, set the name of the ISO file, its location and click Start creating. Then enter your password to open the bootable device and the process should start if the authentication is successful.

Create ISO from Bootable USB Using Gnome Disks

Create ISO from Bootable USB Using Gnome Disks

That’s it for now! In this article, we’ve explained two ways to create an ISO from a bootable USB drive in Linux. Use the comment form below to share your thoughts with us or ask questions.

If You Appreciate What We Do Here On TecMint, You Should Consider:

TecMint is the fastest growing and most trusted community site for any kind of Linux Articles, Guides and Books on the web. Millions of people visit TecMint! to search or browse the thousands of published articles available FREELY to all.

If you like what you are reading, please consider buying us a coffee ( or 2 ) as a token of appreciation.

Support Us

We are thankful for your never ending support.

Aaron Kili

Aaron Kili is a Linux and F.O.S.S enthusiast, an upcoming Linux SysAdmin, web developer, and currently a content creator for TecMint who loves working with computers and strongly believes in sharing knowledge.

Your name can also be listed here. Got a tip? Submit it here to become an TecMint author.

RedHat RHCE and RHCSA Certification Book
Linux Foundation LFCS and LFCE Certification Preparation Guide

You may also like...

14 Responses

  1. Marc Lincoln says:

    Your USB Stick has ISO9660v Partition that is not a problem to make an iso from it! But the most Bootable USB-Sticks has a vfat or fat32 or ext2/3/4 formatted partition

    And Now ??

    This Instruction will not Work with formats other than ISO9660

    I have a 16GB USB-Stick with a bootable Linux Partition (Type 83) and need this as a bootable iso file

  2. sebi says:

    Shouldn’t you provide the iso filename for if=... and the media for of=…? In the parameter definition, you say so but in the example, you do the other way.

    • Aaron Kili says:

      @SEBI

      Check the heading, “2 Ways to Create an ISO from a Bootable USB in Linux”. We are showing how to create an ISO(/home/tecmint/Documents/Linux_Mint_19_XFCE.iso) from a bootable media(/dev/sdb1).

      • laur says:

        I had the exact same problem as sebi!

        I have an iso file of an operating system and have been wanting to create a bootable USB stick with it, and running into problems. After searching and following a few different sets of directions, I stumbled on your article. I did not read the title carefully and therefore followed the advice even though what I’m trying to do is the opposite.

        The article is good, but perhaps you might consider editing it to warn readers that this is NOT for creating a bootable USB from an iso, since I suspect it’s more common to want to do that.

  3. AbdulRehman says:

    I accidentally deleted my image so i re created .Thanks buddy

  4. Denis says:

    Thank you!

  5. Madhu says:

    This will create an image of USB (.img actual file type) and not standard ISO9660 format iso file, you are just changing the extension name, and the size of the output file is equal to the size of the input USB drive, ie: if there is 300MB of content in the 2GB USB drive, then the output file is 2GB only!.

  6. Carlos says:

    I use “cp file.iso /dev/sdx” :-)

  7. hurukan says:

    Wanted to know how to make a USB bootable from a bootable ISO image that is booted without any problem using vmware/virtualbox.

    When I put this ISO image on USB stick it doesn’t boot at all. I tried many programs, many techniques and none of them worked.

Leave a Reply to hurukan Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.