Find Out All Live Hosts IP Addresses Connected on Network in Linux

There are plenty of network monitoring tools you can find in the Linux ecosystem, that can generate for you a summary of the total number of devices on a network including all their IP addresses and more.

However, sometimes what you actually need may be a simple command line tool that can provide you the same information by running a single command.

This tutorial will explain you how to find out all live hosts IP addresses connected to a given network. Here, we will use Nmap tool to find out all IP addresses of devices connected on a same network.

Suggested Read: 29 Examples of ‘Nmap’ Commands for System/Network Administration

The Nmap (short form for Network Mapper) is an open source, powerful and a very versatile command line tool for exploring networks, perform security scans, network audit and finding open ports on remote machine and so much more.

In case you do not have Nmap installed on your system, run the appropriate command below for your distribution to install it:

$ sudo yum install nmap         [On RedHat based systems]
$ sudo dnf install nmap         [On Fedora 22+ versions]
$ sudo apt-get install nmap     [On Debian/Ubuntu based systems]


Once you have
Nmap installed, the syntax for using it is:

$ nmap  [scan type...]  options  {target specification}

Where the argument {target specification}, can be replaced by hostnames, IP addresses, networks and so on.

Therefore to list the IP addresses of all hosts connected to a given network, first of all identify the network and its subnet mask using the ifconfig command or ip command like so:

$ ifconfig
OR
$ ip addr show
Find Network Details in Linux

Find Network Details in Linux

Next, run the Nmap command below:

$ nmap  -sn  10.42.0.0/24
Find All Live Hosts on Network

Find All Live Hosts on Network

In the command above:

  1. -sn – is the type of scan, which means a ping scan. By default, Nmap performs port scanning, but this scan will disable port scanning.
  2. 10.42.0.0/24 – is the target network, replace it with your actual network.

For a comprehensive usage information, make an effort to look into Nmap man page:

$ man nmap

Else, run Nmap without any options and arguments to view a summarized usage information:

$ nmap

In addition, for those interested in learning security scanning techniques in Linux, you can read through this practical guide to Nmap in Kali Linux.

Well, that’s it for now, remember to send us your questions or comments through the response form below. You can as well share with us other methods for listing the IP addresses of all devices connected to a given network.

If You Appreciate What We Do Here On TecMint, You Should Consider:

TecMint is the fastest growing and most trusted community site for any kind of Linux Articles, Guides and Books on the web. Millions of people visit TecMint! to search or browse the thousands of published articles available FREELY to all.

If you like what you are reading, please consider buying us a coffee ( or 2 ) as a token of appreciation.

Support Us

We are thankful for your never ending support.

Aaron Kili

Aaron Kili is a Linux and F.O.S.S enthusiast, an upcoming Linux SysAdmin, web developer, and currently a content creator for TecMint who loves working with computers and strongly believes in sharing knowledge.

Your name can also be listed here. Got a tip? Submit it here to become an TecMint author.

RedHat RHCE and RHCSA Certification Book
Linux Foundation LFCS and LFCE Certification Preparation Guide

You may also like...

6 Responses

  1. Rms-Mit says:

    This will work on IPv4 but not on an IPv6 network. a sub-net on IPv6 has 64 bits of address space in each sub-net. It would take a 1000 years for a fast computer to scan that IP range. I was hoping that there might be a reference to some Neighbor discovery tool to achieve this on an IPv6 network

  2. Mace Moneta says:

    Using nmap is an active scan, but that’s not necessary for this purpose. All hosts arp to identify themselves to other hosts on the network, so simply displaying the arp table will show you what you want, instantly.

    arp -n | grep -v “incomplete\|Flags” | sort -V

  3. Mightyjordi says:

    This is nice. Is there a command that will display (all live non assigned) available IP addresses in a network?

Leave a Reply to Ravi Saive Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.