MTR – A Network Diagnostic Tool for Linux

MTR is a simple, cross-platform command-line network diagnostic tool that combines the functionality of commonly used traceroute and ping programs into a single tool. In a similar fashion as traceroute, mtr prints information about the route that packets take from the host on which mtr is run to a user specified destination host.

Read Also: How to Audit Network Performance, Security and Troubleshoot in Linux

However, mtr shows a wealth of information than traceroute: it determines the pathway to a remote machine while printing response percentage as well as response times of all network hops in the internet route between the local system and a remote machines.

How Does MTR Work?

Once you run mtr, it probes the network connection between the local system and a remote host that you have specified. It first establishes the address of each network hop (bridges, routers and gateways etc.) between the hosts, it then pings (sends a sequence ICMP ECHO requests to) each one to determine the quality of the link to each machine.

During the course of this operation, mtr outputs some useful statistics about each machine – updated in real-time, by default.

This tool comes pre-installed on most Linux distributions and is fairly easy to use once you go through the 10 mtr command examples for network diagnostics in Linux, explained below.

If mtr not installed, you can install it on your respective Linux distributions using your default package manager as shown.

$ sudo apt install mtr
$ sudo yum install mtr
$ sudo dnf install mtr

10 MTR Network Diagnostics Tool Usage Examples

1. The simplest example of using mtr is to provide the domain name or IP address of the remote machine as an argument, for example or This command will show you a traceroute report updated in real-time, until you exit the program (by pressing q or Ctrl + C).

$ mtr
$ mtr

Start: Thu Jun 28 12:10:13 2018
HOST: TecMint                     Loss%   Snt   Last   Avg  Best  Wrst StDev
  1.|--                0.0%     5    0.3   0.3   0.3   0.4   0.0
  2.|--                  0.0%     5    0.7   0.9   0.7   1.3   0.0
  3.|-- 209.snat-111-91-120.hns.n 80.0%     5    7.1   7.1   7.1   7.1   0.0
  4.|--              0.0%     5    1.9   2.9   1.9   4.4   1.1
  5.|--            0.0%     5    2.9   3.5   2.0   4.3   0.7
  6.|--             0.0%     5    3.0   6.2   2.9  18.3   6.7
  7.|--  0.0%     5    2.1   2.4   2.0   3.8   0.5

2. You can force mtr to display numeric IP addresses instead of host names (typically FQDNsFully Qualified Domain Names), using the -n flag as shown.

$ mtr -n

Start: Thu Jun 28 12:12:58 2018
HOST: TecMint                     Loss%   Snt   Last   Avg  Best  Wrst StDev
  1.|--                0.0%     5    0.3   0.3   0.3   0.4   0.0
  2.|--                  0.0%     5    0.9   0.9   0.8   1.1   0.0
  3.|-- ???                       100.0     5    0.0   0.0   0.0   0.0   0.0
  4.|--              0.0%     5    2.0   2.0   1.9   2.0   0.0
  5.|--            0.0%     5    2.3   2.3   2.2   2.4   0.0
  6.|--             0.0%     5    3.0   3.2   3.0   3.3   0.0
  7.|--            0.0%     5    3.7   3.6   2.0   5.3   1.4

3. If you would like mtr to display both host names as well as numeric IP numbers use the -b flag as shown.

$ mtr -b

Start: Thu Jun 28 12:14:36 2018
HOST: TecMint                     Loss%   Snt   Last   Avg  Best  Wrst StDev
  1.|--                0.0%     5    0.3   0.3   0.3   0.4   0.0
  2.|--                  0.0%     5    0.7   0.8   0.6   1.0   0.0
  3.|-- 209.snat-111-91-120.hns.n  0.0%     5    1.4   1.6   1.3   2.1   0.0
  4.|--              0.0%     5    1.8   2.1   1.8   2.6   0.0
  5.|--            0.0%     5    2.0   1.9   1.8   2.0   0.0
  6.|--             0.0%     5    2.4   2.7   2.4   2.9   0.0
  7.|--  0.0%     5    3.7   2.2   1.7   3.7   0.9

4. To limit the number of pings to a specific value and exit mtr after those pings, use the -c flag. If you observe from the Snt column, once the specified number of pings is reached, the live update stops and the program exits.

$ mtr -c5

5. You can set it into report mode using the -r flag, a useful option for producing statistics concerning network quality. You can use this option together with the -c option to specify the number of pings. Since the statistics are printed to std output, you can redirect them to a file for later analysis.

$ mtr -r -c 5 >mtr-report

The -w flag enables wide report mode for a clearer output.

$ mtr -rw -c 5 >mtr-report

6. You can also re-arrange the output fields the way you wish, this is made possible by the -o flag as shown (see the mtr man page for meaning of field labels).

$ mtr -o "LSDR NBAW JMXI"
MTR Fields and Order
MTR Fields and Order

7. The default interval between ICMP ECHO requests is one second, you can specify interval between ICMP ECHO requests by changing the value using the -i flag as shown.

$ mtr -i 2

8. You can use TCP SYN packets or UDP datagrams instead of the default ICMP ECHO requests as shown.

$ mtr --tcp
$ mtr --udp 

9. To specify the maximum number of hops (default is 30) to be probed between the local system and the remote machine, use the -m flag.

$ mtr -m 35

10. While probing network quality, you can set the packet size used in bytes using the -s flag like so.

$ mtr -r -s PACKETSIZE -c 5 >mtr-report

With these examples, you should be good to go with using mtr, see man page for more usage options.

$ man mtr 

Also check out these useful guides about Linux network configurations and troubleshooting:

  1. 13 Linux Network Configuration and Troubleshooting Commands
  2. How to Block Ping ICMP Requests to Linux Systems

That’s it for now! MTR is a simple, easy-to-use and above all cross-platform network diagnostics tool. In this guide, we have explained 10 mtr command examples in Linux. If you have any questions, or thoughts to share with us, use the comment form below.

Hey TecMint readers,

Exciting news! Every month, our top blog commenters will have the chance to win fantastic rewards, like free Linux eBooks such as RHCE, RHCSA, LFCS, Learn Linux, and Awk, each worth $20!

Learn more about the contest and stand a chance to win by sharing your thoughts below!

Aaron Kili
Aaron Kili is a Linux and F.O.S.S enthusiast, an upcoming Linux SysAdmin, web developer, and currently a content creator for TecMint who loves working with computers and strongly believes in sharing knowledge.

Each tutorial at TecMint is created by a team of experienced Linux system administrators so that it meets our high-quality standards.

Join the TecMint Weekly Newsletter (More Than 156,129 Linux Enthusiasts Have Subscribed)
Was this article helpful? Please add a comment or buy me a coffee to show your appreciation.

Got Something to Say? Join the Discussion...

Thank you for taking the time to share your thoughts with us. We appreciate your decision to leave a comment and value your contribution to the discussion. It's important to note that we moderate all comments in accordance with our comment policy to ensure a respectful and constructive conversation.

Rest assured that your email address will remain private and will not be published or shared with anyone. We prioritize the privacy and security of our users.