Understanding Shared Libraries in Linux

In programming, a library is an assortment of pre-compiled pieces of code that can be reused in a program. Libraries simplify life for programmers, in that they provide reusable functions, routines, classes, data structures and so on (written by a another programmer), which they can use in their programs.

For instance, if you are building an application that needs to perform math operations, you don’t have to create a new math function for that, you can simply use existing functions in libraries for that programming language.

Examples of libraries in Linux include libc (the standard C library) or glibc (GNU version of the standard C library), libcurl (multiprotocol file transfer library), libcrypt (library used for encryption, hashing, and encoding in C) and many more.

Linux supports two classes of libraries, namely:

  • Static libraries – are bound to a program statically at compile time.
  • Dynamic or shared libraries – are loaded when a program is launched and loaded into memory and binding occurs at run time.

Dynamic or shared libraries can further be categorized into:

  • Dynamically linked libraries – here a program is linked with the shared library and the kernel loads the library (in case it’s not in memory) upon execution.
  • Dynamically loaded libraries – the program takes full control by calling functions with the library.

Shared Library Naming Conventions

Shared libraries are named in two ways: the library name (a.k.a soname) and a “filename” (absolute path to file which stores library code).

For example, the soname for libc is libc.so.6: where lib is the prefix, c is a descriptive name, so means shared object, and 6 is the version. And its filename is: /lib64/libc.so.6. Note that the soname is actually a symbolic link to the filename.

Locating Shared Libraries in Linux

Shared libraries are loaded by ld.so (or ld.so.x) and ld-linux.so (or ld-linux.so.x) programs, where x is the version. In Linux, /lib/ld-linux.so.x searches and loads all shared libraries used by a program.

A program can call a library using its library name or filename, and a library path stores directories where libraries can be found in the filesystem. By default, libraries are located in /usr/local/lib, /usr/local/lib64, /usr/lib and /usr/lib64; system startup libraries are in /lib and /lib64. Programmers can, however, install libraries in custom locations.

The library path can be defined in /etc/ld.so.conf file which you can edit with a command line editor.

# vi /etc/ld.so.conf 

The line(s) in this file instruct the kernel to load file in /etc/ld.so.conf.d. This way, package maintainers or programmers can add their custom library directories to the search list.

If you look into the /etc/ld.so.conf.d directory, you’ll see .conf files for some common packages (kernel, mysql and postgresql in this case):

# ls /etc/ld.so.conf.d

kernel-2.6.32-358.18.1.el6.x86_64.conf  kernel-2.6.32-696.1.1.el6.x86_64.conf  mariadb-x86_64.conf
kernel-2.6.32-642.6.2.el6.x86_64.conf   kernel-2.6.32-696.6.3.el6.x86_64.conf  postgresql-pgdg-libs.conf

If you take a look at the mariadb-x86_64.conf, you will see an absolute path to package’s libraries.

# cat mariadb-x86_64.conf

/usr/lib64/mysql

The method above sets the library path permanently. To set it temporarily, use the LD_LIBRARY_PATH environment variable on the command line. If you want to keep the changes permanent, then add this line in the shell initialization file /etc/profile (global) or ~/.profile (user specific).

# export LD_LIBRARY_PATH=/path/to/library/file

Managing Shared Libraries in Linux

Let us now look at how to deal with shared libraries. To get a list of all shared library dependencies for a binary file, you can use the ldd utility. The output of ldd is in the form:

library name =>  filename (some hexadecimal value)
OR
filename (some hexadecimal value)  #this is shown when library name can’t be read

This command shows all shared library dependencies for the ls command.

# ldd /usr/bin/ls
OR
# ldd /bin/ls
Sample Output
	linux-vdso.so.1 =>  (0x00007ffebf9c2000)
	libselinux.so.1 => /lib64/libselinux.so.1 (0x0000003b71e00000)
	librt.so.1 => /lib64/librt.so.1 (0x0000003b71600000)
	libcap.so.2 => /lib64/libcap.so.2 (0x0000003b76a00000)
	libacl.so.1 => /lib64/libacl.so.1 (0x0000003b75e00000)
	libc.so.6 => /lib64/libc.so.6 (0x0000003b70600000)
	libdl.so.2 => /lib64/libdl.so.2 (0x0000003b70a00000)
	/lib64/ld-linux-x86-64.so.2 (0x0000561abfc09000)
	libpthread.so.0 => /lib64/libpthread.so.0 (0x0000003b70e00000)
	libattr.so.1 => /lib64/libattr.so.1 (0x0000003b75600000)

Because shared libraries can exist in many different directories, searching through all of these directories when a program is launched would be greatly inefficient: which is one of the likely disadvantages of dynamic libraries. Therefore a mechanism of caching employed, performed by a the program ldconfig.

By default, ldconfig reads the content of /etc/ld.so.conf, creates the appropriate symbolic links in the dynamic link directories, and then writes a cache to /etc/ld.so.cache which is then easily used by other programs.

This is very important especially when you have just installed new shared libraries or created your own, or created new library directories. You need to run ldconfig command to effect the changes.

# ldconfig
OR
# ldconfig -v 	#shows files and directories it works with

After creating your shared library, you need to install it. You can either move it into any of the standard directories mentioned above, and run the ldconfig command.

Alternatively, run the following command to create symbolic links from the soname to the filename:

# ldconfig -n /path/to/your/shared/libraries

To get started with creating your own libraries, check out this guide from The Linux Documentation Project(TLDP).

Thats all for now! In this article, we gave you an introduction to libraries, explained shared libraries and how to manage them in Linux. If you have any queries or additional ideas to share, use the comment form below.

If You Appreciate What We Do Here On TecMint, You Should Consider:

TecMint is the fastest growing and most trusted community site for any kind of Linux Articles, Guides and Books on the web. Millions of people visit TecMint! to search or browse the thousands of published articles available FREELY to all.

If you like what you are reading, please consider buying us a coffee ( or 2 ) as a token of appreciation.

Support Us

We are thankful for your never ending support.

Aaron Kili

Aaron Kili is a Linux and F.O.S.S enthusiast, an upcoming Linux SysAdmin, web developer, and currently a content creator for TecMint who loves working with computers and strongly believes in sharing knowledge.

Your name can also be listed here. Got a tip? Submit it here to become an TecMint author.

RedHat RHCE and RHCSA Certification Book
Linux Foundation LFCS and LFCE Certification Preparation Guide

You may also like...

5 Responses

  1. mirhossein says:

    Should I update cache after installing library with `ldconfig -n /xx` command?

  2. NikiC says:

    If I run “ldconfig -p” in my new Centos 7 installation I see 269 entries, but /etc/ld.so.conf include ld.so.conf.d/*.conf which have only two files:

    kernel-3.10.0-123.el7.x86_64.conf (empty)
    mariadb-x86_64.conf (/usr/lib64/mysql)
    

    Where all that other shared libraries come from???

    Thank you .

  3. Jalal says:

    Hi,

    Thanks a lot for very nice material

    Please change -V to -v in
    # ldconfig -V #shows files and directories it works with

Leave a Reply to mirhossein Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.