10 Lesser Known Effective Linux Commands – Part IV

Continuing the Lesser Known series, this fourth article of the series will let you know some useful funny and animated commands. Here we go into the practical session, without much theory.

10 Lesser Known Effective Commands

10 Lesser Known Effective Commands

  1. 11 Lesser Known Useful Linux Commands – Part I
  2. 10 Lesser Known Linux Commands – Part 2
  3. 10 Lesser Known Commands for Linux – Part 3
  4. 10 Lesser Known Useful Linux Commands- Part V

In the fourth article of this series which includes few other lesser known Linux commands, worth knowing. Might be you’re already aware of these commands, no doubt you’re an experienced Linux user and loves exploration.

32. strace Command

The strace is a debugging tool which is used primarily for troubleshooting purpose in Linux. It might not be installed by default in your system and you may need to apt or yum the required package.

Trace a command execution using strace command:

[email protected] [~]# strace pwd
Sample Output
execve("/bin/pwd", ["pwd"], [/* 29 vars */]) = 0
brk(0)                                  = 0x728000
mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f29b0df2000
access("/etc/ld.so.preload", R_OK)      = -1 ENOENT (No such file or directory)
open("/etc/ld.so.cache", O_RDONLY)      = 3
fstat(3, {st_mode=S_IFREG|0644, st_size=38427, ...}) = 0
mmap(NULL, 38427, PROT_READ, MAP_PRIVATE, 3, 0) = 0x7f29b0de8000
close(3)                                = 0
open("/lib64/libc.so.6", O_RDONLY)      = 3
read(3, "\177ELF\2\1\1\3\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\360\355\1I;\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0755, st_size=1922152, ...}) = 0
mmap(0x3b49000000, 3745960, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x3b49000000
mprotect(0x3b4918a000, 2093056, PROT_NONE) = 0
mmap(0x3b49389000, 20480, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x189000) = 0x3b49389000
mmap(0x3b4938e000, 18600, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x3b4938e000
close(3)                                = 0
mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f29b0de7000
mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f29b0de6000
mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f29b0de5000

The strace command accepts a lot of arguments and have many options. Refer to man page for detailed information.

33. disown -a && exit Command

Most of the system administrators use screen command to control jobs running in the terminal background. Let’s say if you having a long running job and want to detach from the terminal, you use screen command to do it. But what if you don’t know how to use screen, here comes disown command to rescue.

The disown command is used to run the jobs continuously in the background even after you closing the terminal session. The syntax of the disown command is:

[email protected] [~]# Command; disown -a && exit

To detach again the long running job in the terminal, use the jobs command to find the job number and then use disown %n where n is the job number. To verify actually the job is running use ps or top command. The nohup command is an alternative to the disown command.

34. getconf LONG_BIT Command

The above command shows your machine architecture if it is 32 bit or 64 bit?

[email protected] [~]# getconf LONG_BIT


Download Linux Command Line Cheat Sheet

Download Linux Command Line Book

35. Display Date on the Terminal

The below command is a combination of several commands, better say it a script. For a person working at shell or terminal, without GUI seeing current system date is tedious job. You have to type ‘date‘ command to check today’s date.

Just execute the below command on you prompt and see the date and time on the above right corner of terminal.

[email protected] [~]# while sleep 1;do tput sc;tput cup 0 $(($(tput cols)-29));date;tput rc;done &
Show Date in Terminal

Show Date in Terminal

36. convert Command

While writing tutorial, I usually need to produce output, many a times in image format. The above command combination does this for me. Say I need the output of tree command (for /etc/x11 directory) in image format. What I did at terminal was:

[email protected]:/etc/X11# tree | convert label:@- /home/avi/tree.png

The output of the above command can be seen at the specified location (here, home directory of mine) with the file name specified as tree.png.

37. watch -t -n1 “date +%T|figlet”

Remember our description of “figlet” command in our earlier article “20 Funny Commands of Linux”. This command was very cool, this time we will be pipelining ‘figlet‘ to show animated digital clock in the terminal.

Just check-out yourself, remember you must have figlet installed on the system, do apt or yum to install the required package.

[email protected] [~]# watch -t -n1 "date +%T|figlet"
Sample Output
 _  ___    ____   ___    _____ _  _                                                                                             Fri Nov 29 10:29:34 GMT 
/ |/ _ \ _|___ \ / _ \ _|___ /| || |
| | | | (_) __) | (_) (_) |_ \| || |_
| | |_| |_ / __/ \__, |_ ___) |__   _|
|_|\___/(_)_____|  /_/(_)____/   |_|

38. host and dig Commands

Although “host” and “dig” command is not that much lesser known, still not very frequently used. The host command is DNS lookup utility.

[email protected] [~]# host www.google.com

www.google.com has address
www.google.com has address
www.google.com has address
www.google.com has address
www.google.com has address
www.google.com has address
www.google.com has IPv6 address 2a00:1450:400c:c03::68
[email protected] [~]# dig www.google.com

; <<>> DiG 9.8.2rc1-RedHat-9.8.2-0.17.rc1.el6_4.6 <<>> www.google.com
;; global options: +cmd
;; Got answer:
;; ->>HEADER<

39. dstat Command

The dstat is a versatile tool, that generates statistics relating to system resource. By default your system might not have ‘dstat‘ installed. Do a apt or yum to install ‘dstat‘ before using this very colorful and description system resource generator.

[email protected] [~]# dstat
dstat command

dstat command

40. bind -p Command

The ‘bind -p‘ command will show all the shortcuts available for BASH shell.

[email protected] [~]# bind -p
Sample Output
"\C-g": abort 
"\C-x\C-g": abort 
"\e\C-g": abort 
"\C-j": accept-line
"\C-m": accept-line 
# alias-expand-line (not bound) 
# arrow-key-prefix (not bound) 
# backward-byte (not bound) 
"\C-b": backward-char 
"\eOD": backward-char 
"\e[D": backward-char 
"\e!": complete-command 
"\e/": complete-filename 
"\[email protected]": complete-hostname 
"\e{": complete-into-braces 
"\e~": complete-username 
"\e$": complete-variable 
# copy-backward-word (not bound)
# copy-forward-word (not bound) 
# copy-region-as-kill (not bound)

41. touch /forcefsck

The above command will create an empty folder ‘forcefsck‘, under root directory. This will force Linux System to check the file system on the very next boot.

[email protected] [~]# touch /forcefsck

That’s all for Now. You People are loving these ‘Lesser Known Commands‘ and hence we are continuing the series, the next article of this series will be available very soon.

Till then stay tuned and connected to Tecmint. Don’t forget to give your valuable feedback in our comment section. Do a favor to us, Like and share us and help us spread.

If You Appreciate What We Do Here On TecMint, You Should Consider:

TecMint is the fastest growing and most trusted community site for any kind of Linux Articles, Guides and Books on the web. Millions of people visit TecMint! to search or browse the thousands of published articles available FREELY to all.

If you like what you are reading, please consider buying us a coffee ( or 2 ) as a token of appreciation.

Support Us

We are thankful for your never ending support.

RedHat RHCE and RHCSA Certification Book
Linux Foundation LFCS and LFCE Certification Preparation Guide
The Complete Linux System Administrator Bundle
Become an Ethical Hacker Bonus Bundle

You may also like...

9 Responses

  1. Chris says:

    34. getconf LONG_BIT

    This produces no output on my system.

  2. quydo says:

    Hi tecmint team

    I think you should post commands which used frequently in daily work :D

    For example command number 37 :D

    Thanks for your useful tutorial ^_^

  3. saurabh singh says:

    the linux command to reset your password for the currently logged user. plz tell me….

    • Ravi Saive says:

      Run the ‘passwd username’ to command to reset current logged in user. Make sure you must be root user to perform such command.

  4. sam says:

    Great List, Thanks.

  5. rizin says:

    “job” command is not working in Centos-6.4, Any idea ?

Leave a Reply to Ravi Saive Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.