How to Auto Execute Commands/Scripts During Reboot or Startup

I am always fascinated by the things going on behind the scenes when I boot a Linux system and log on. By pressing the power button on a bare metal or starting a virtual machine, you put in motion a series of events that lead to a fully-functional system – sometimes in less than a minute. The same is true when you log off and / or shutdown the system.

What makes this more interesting and fun is the fact that you can have the operating system execute certain actions when it boots and when you logon or logout.

In this distro-agnostic article we will discuss the traditional methods for accomplishing these goals in Linux.

Note: We will assume the use of Bash as main shell for logon and logout events. If you happen to use a different one, some of these methods may or may not work. If in doubt, refer to the documentation of your shell.

Executing Linux Scripts During Reboot or Startup

There are two traditional methods to execute a command or run scripts during startup:

Method #1 – Use a cron Job

Besides the usual format (minute / hour / day of month / month / day of week) that is widely used to indicate a schedule, cron scheduler also allows the use of @reboot. This directive, followed by the absolute path to the script, will cause it to run when the machine boots.

However, there are two caveats to this approach:

  1. a) the cron daemon must be running (which is the case under normal circumstances), and
  2. b) the script or the crontab file must include the environment variables (if any) that will be needed (refer to this StackOverflow thread for more details).

Method #2 – Use /etc/rc.d/rc.local

This method is valid even for systemd-based distributions. In order for this method to work, you must grant execute permissions to /etc/rc.d/rc.local as follows:

# chmod +x /etc/rc.d/rc.local

and add your script at the bottom of the file.

The following image shows how to run two sample scripts (/home/gacanepa/script1.sh and /home/gacanepa/script2.sh) using a cron job and rc.local, respectively, and their respective results.

script1.sh:
#!/bin/bash
DATE=$(date +'%F %H:%M:%S')
DIR=/home/gacanepa
echo "Current date and time: $DATE" > $DIR/file1.txt
script2.sh:
#!/bin/bash
SITE="Tecmint.com"
DIR=/home/gacanepa
echo "$SITE rocks... add us to your bookmarks." > $DIR/file2.txt
Run Linux Scripts at Startup
Run Linux Scripts at Startup

Keep in mind that both scripts must be granted execute permissions previously:

$ chmod +x /home/gacanepa/script1.sh
$ chmod +x /home/gacanepa/script2.sh

Executing Linux Scripts at Logon and Logout

To execute a script at logon or logout, use ~.bash_profile and ~.bash_logout, respectively. Most likely, you will need to create the latter file manually. Just drop a line invoking your script at the bottom of each file in the same fashion as before and you are ready to go.

Summary

In this article we have explained how to run script at reboot, logon, and logout. If you can think of other methods we could have included here, feel free to use the comment form below to point them out. We look forward to hearing from you!

If you liked this article, then do subscribe to email alerts for Linux tutorials. If you have any questions or doubts? do ask for help in the comments section.

If You Appreciate What We Do Here On TecMint, You Should Consider:

TecMint is the fastest growing and most trusted community site for any kind of Linux Articles, Guides and Books on the web. Millions of people visit TecMint! to search or browse the thousands of published articles available FREELY to all.

If you like what you are reading, please consider buying us a coffee ( or 2 ) as a token of appreciation.

Support Us

We are thankful for your never ending support.

12 thoughts on “How to Auto Execute Commands/Scripts During Reboot or Startup”

  1. Hello tecmint,

    I want to run this command under regular user not as root every time my VPS restarted, its a cheap VPS still running centos 5

    # nohup java -jar /opt/serposcope-2.11.0.jar &
    

    this guide seems to execute as a root

    Reply
  2. This worked just like I was needed. The rc.local was what I needed to create a “gold disk” partition to cover different hardware.

    Reply
  3. Linux mint has no rc.d folder, it does have rc0.d, rc1.d up to rc6.d/etc/rc.local does not execute in Linux Mint but is there.

    There is an /etc/init.d/rc.local that supposedly executes /etc/rc.local but doesn’t.

    Reply
    • I fixed things…

      /etc/profile can me made executable and allows system wide settings to be made here.

      Better yet I wrote a script ‘startup‘ and put in my local ‘bin‘ directory and added it to Mint Mate’s startup programs.

      Now I can edit without root permission and set all kinds of things.

      Things got crazy when I added the new external monitor HDMI, touchscreen, sound and all needed tweaking.

      Reply
  4. Hi, thanks for that tutorial. I tried method #2 with an iptables script, which should execute after a reboot. Unfortunately it doesnt work, do you know why? Is it possible that the iptables service is not yet started when the script tries to execute the rules?

    Reply

Leave a Reply to Dan St.André Cancel reply

Have a question or suggestion? Please leave a comment to start the discussion. Please keep in mind that all comments are moderated and your email address will NOT be published.

This site uses Akismet to reduce spam. Learn how your comment data is processed.