How to Install LAMP (Linux, Apache, MariaDB and PHP) on Fedora 23 Server and Workstation

If you ever wanted to host your own website or just want to try your PHP programming skills, you will most definitely have stumbled upon LAMP.

For those of you, who don’t know what LAMP is, this is a stack of web service software. LAMP uses the first letter of each package included in it – Linux, Apache, Mysql/MariaDB and PHP.

Install LAMP in Fedora 23

Install LAMP in Fedora 23

In this article, we will show you how to install LAMP (Linux, Apache, MySQL/MariaDB and PHP) in Fedora 23 Server and Workstation.

I will assume that you have already completed the installation of Fedora 23 Server and Workstation, which basically completes the “Linux” part. But if you haven’t completed the Fedora install yet, you can check our guides here:

  1. How to Install Fedora 23 Workstation
  2. Installation of Fedora 23 Server and Administration with Cockpit

Before we start the installation of the rest of the packages, we recommend to update your packages with the following command:

$ sudo dnf update
Update Fedora 23 Packages

Update Fedora 23 Packages

Now we can safely proceed to the installation of the rest of the packages. For easier understanding and follow up, the article will be separated in three parts, one for each package.

Step 1: Installing Apache Web Server

1. Apache web server is the most used web server on the internet. It’s powering millions of websites and is one of the most reliable solutions you can get for a web server. There are plenty of modules that can help you customize the functionality of Apache and also security modules such as mod_security to protect your web sites.

To install Apache in Fedora 23, you can simply run the following command:

$ sudo dnf install httpd
Install Apache Web Server in Fedora 23

Install Apache Web Server in Fedora 23

2. Once the install is complete, there are few more things to be done. First we will setup Apache to automatically start upon system boot and then we will start and verify the status of Apache.

For that purpose, run the following series of commands:

$ sudo systemctl enable httpd.service
$ sudo systemctl start httpd
$ sudo systemctl status httpd
Enable, Start and Verify Apache Server

Enable, Start and Verify Apache Server

3. To allow access to the web server over HTTP and HTTPS, you will need to allow access to it in the system firewall. For that purpose, add the following rules in the fedora firewall:

$ sudo firewall-cmd --permanent --add-service=http
$ sudo firewall-cmd --permanent --add-service=https
$ sudo systemctl reload firewalld
Enable Access to Apache on Firewall in Fedora 23

Enable Access to Apache on Firewall in Fedora 23

4. Now it’s time to check if Apache is running. Find your system’s IP address with command such as:

$ ip a | grep inet
Find Fedora 23 Server IP Address

Find Fedora 23 Server IP Address

5. Now copy/paste that IP address in your browser. You should see the following page:

http://your-ip-address
Check Apache Default Page

Check Apache Default Page

The default Apache directory is:

/var/www/html/

If you need to have files accessible over web, you should place the files in that directory.

Step 2: Installing MariaDB Server

6. MariaDB is a relational database server. It has been forked by the MySQL creator, due to concerns over Oracles acquisition of the MySQL project.

MariaDB is meant to remain free under the GPU general public license. It’s community developed and is slowly becoming the preferred database server by most of the recently released distributions.

To install MariaDB in Fedora 23, run the following command:

# dnf install mariadb-server
Install MariaDB in Fedora 23

Install MariaDB in Fedora 23

7. When the install finishes, configure MariaDB to automatically start after system boot and then start and verify the status of MariaDB with the following commands:

# systemctl enable mariadb
# systemctl start mariadb
# systemctl status mariadb
Enable and Start MariaDB

Enable and Start MariaDB

Check MariaDB Status

Check MariaDB Status

8. There are few settings that need to be adjusted in order to secure your MariaDB installation. To change this settings, we recommend running the following command:

# mysql_secure_installation

This action will start a series of questions that you will need to answer in order to improve the security of your MySQL server.

Here is what you will need to do.

  1. When asked for MySQL root password, leave empty. There is no password by default.
  2. After that you will be asked to enter the new “root” password for MariaDB. Make sure to select a strong one.
  3. After that, you will be prompted if you wish to remove the MariaDB anonymous user. This user is not needed, so your should be “y” for yes.
  4. Next, you will need to disallow remote access to the databases from root. The reason behind that is that you can later create separate users for each database that will be able to access the required databases.
  5. Continuing further, you will be asked whether or not you wish to remove the “test” database that was created upon installation of MariaDB. This database is not needed so you can safely remove it.

Finally reload the database privileges and you are done.

Enter MariaDB Root Password

Enter MariaDB Root Password

MySQL Secure Installation

MySQL Secure Installation

Step 3: Installing PHP

9. PHP is a programming language used on most of the websites over the internet. It’s used for creating dynamic websites. To give you an idea of what sites you can build with PHP, I will tell you that www.tecmint.com is built on PHP.

To install PHP in Fedora 23, you will need to run the following command:

# dnf install php php-common
Install PHP in Fedora 23

Install PHP in Fedora 23

10. Next install required PHP modules to run PHP/MySQL applications using following command.

# dnf install php-mysql php-pdo php-gd php-mbstring
Install PHP Modules

Install PHP Modules

11. Once the installation is complete, restart Apache so it can start using PHP:

# systemctl restart httpd

12. Now let’s test our settings. Create a file called info.php in the following directory: /var/www/html. You can use command such as:

# cd /var/www/html/
# nano info.php

Enter the following code:

<?php
phpinfo()
?>

Now save the file. Go back to your browser and enter the following:

http://your-ip-address/info.php

You should now be able to see the PHP info page that you just created:

Check PHP Information

Check PHP Information

Conclusion

Your installation of the LAMP stack on Fedora 23 is now complete and you can start creating your awesome web projects. If you liked the article or simply have a question, please do not hesitate to submit your comment in the section below.

If You Appreciate What We Do Here On TecMint, You Should Consider:

TecMint is the fastest growing and most trusted community site for any kind of Linux Articles, Guides and Books on the web. Millions of people visit TecMint! to search or browse the thousands of published articles available FREELY to all.

If you like what you are reading, please consider buying us a coffee ( or 2 ) as a token of appreciation.

Support Us

We are thankful for your never ending support.

Marin Todorov

I am a bachelor in computer science and a Linux Foundation Certified System Administrator. Currently working as a Senior Technical support in the hosting industry. In my free time I like testing new software and inline skating.

Your name can also be listed here. Got a tip? Submit it here to become an TecMint author.

RedHat RHCE and RHCSA Certification Book
Linux Foundation LFCS and LFCE Certification Preparation Guide

You may also like...

35 Responses

  1. ahmad zaki bin abdullah says:

    Hi, thanks for the tutorial. It apply to fedora server 25, really appreciated it…

    • Ravi Saive says:

      @Ahmad,

      Yes, Fedora 25 is latest version of Fedora 23 with minor changes, so using these instructions you can easily install LAMP on Fedora 25 without any issues.

  2. Azhar Munshi says:

    Hi..

    Great Work Dude :)

    I install apache, mysql and php as your instruction and succeeded. Now I want to know which is the url for phpmyadmin.

    I started all the service, and run the file info.php and it show information about php but when I try to run http://my-server-ip/phpmyadmin it says not found.

    Help me with this BTW Article is great and worked successfully.. I am using fedora 24 workstation edition.

    Thank You;

  3. helwie ahmad says:

    very nice tutorial.

  4. Ryan says:

    Just started using Fedora. A great article! Waiting for more content like this on the Net

  5. VMF says:

    Thank you very much for the great step-by-step content.

  6. Francisco says:

    HI !
    I want to know how to remove the automatic starter
    Thanks !

    • Ravi Saive says:

      @Francisco,

      What do you mean by automatic starter? could you describe it more clearly? or if I am not wrong, you want to disable auto starting of Apache or Mysql? if yes, here is the command to disable them.

      # systemctl disable httpd
      # systemctl disable mariadb
      
  7. David says:

    Thank you so much for you play by play instructions. Most people do not do this as well as you do. They just assume readers know certain things and they continue leaving steps out….but you did not. So thank you and I hope you keep writing for us, some of us really need the help because we are new to linux but we hate windows so we are trying to break free and papers like this help us do that.

    • Marin Todorov says:

      Thanks for your kind words David. If there are any specific tutorials you would like to see on Tecmint please let us know and we will do our best to cover them for you.

  8. Pat says:

    Nice everything worked well accept the php info file it only gives me a grey screen? however the php install said it completed successfully. I’m really disapointed that fedora doesn’t incluid a gui for: package management, mariadb, Apache. As a part time user having to remember command line details is really unrealistic.

    • Marin Todorov says:

      Hia Pat. Could you please check if anyting is written in the apache error log? Share the lines with us in here.

  9. Lam Vo says:

    Thank you very much!

  10. Iulian says:

    Hi
    Im using fedora server 23 with XAMPP PHP 7.0.5 and I want to upgrade PHP 7.0.6.
    How do you advise me to do?
    php settings lose? risk sites not to go?
    tx!

    • Ravi Saive says:

      @Lulian,

      I think you should just update the XAMPP, it will automatically upgrade PHP to most recent version, check out XAMPP official docs for upgrading PHP..

Leave a Reply to Azhar Munshi Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.