10 sFTP Command Examples to Transfer Files on Remote Servers in Linux

File Transfer Protocol (FTP) was a widely used protocol to transfer files or data remotely in an unencrypted format which is not a secure way to communicate.

As we all know that File Transfer Protocol is not at all secure because all transmissions happen in clear text and the data can be readable by anyone during sniffing the packets on the network.

sftp commands
10 sftp command examples

So, basically, FTP can be used in limited cases or on the networks that you trust. Over the period of time, SCP (Secure Copy) and SSH (Secure Shell) addresses this security ambiguity and added an encrypted secure layer while transferring data between remote computers.

[ You might also like: Best Command-Line FTP Clients for Linux ]

SFTP (Secure File Transfer Protocol) runs over SSH protocol on standard port 22 by default to establish a secure connection. SFTP has been integrated into many GUI tools (FileZilla, WinSCP, FireFTP, etc.).

Security Warnings: Please don’t open the SSH port (Secure SHell) globally as this would be a security breach. You can only open for specific IP from where you are going to transfer or manage files on the remote system or vice versa.

This article will guide you to 10 sftp command examples to use through the interactive command-line interface in the Linux terminal.

1. How to Connect to SFTP

By default, the same SSH protocol is used to authenticate and establish an SFTP connection. To start an SFTP session, enter the username and remote hostname or IP address at the command prompt. Once authentication is successful, you will see a shell with an sftp> prompt.

[root@tecmint ~]# sftp [email protected]

Connecting to
[email protected]'s password:

2. Getting Help

Once, you are in the sftp prompt, check the available commands by typing ‘?‘ or ‘help‘ at the command prompt.

sftp> ?
Available commands:
cd path                       Change remote directory to 'path'
lcd path                      Change local directory to 'path'
chgrp grp path                Change group of file 'path' to 'grp'
chmod mode path               Change permissions of file 'path' to 'mode'
chown own path                Change owner of file 'path' to 'own'
help                          Display this help text
get remote-path [local-path]  Download file
lls [ls-options [path]]       Display local directory listing
ln oldpath newpath            Symlink remote file
lmkdir path                   Create local directory
lpwd                          Print local working directory
ls [path]                     Display remote directory listing
lumask umask                  Set local umask to 'umask'
mkdir path                    Create remote directory
put local-path [remote-path]  Upload file
pwd                           Display remote working directory
exit                          Quit sftp
quit                          Quit sftp
rename oldpath newpath        Rename remote file
rmdir path                    Remove remote directory
rm path                       Delete remote file
symlink oldpath newpath       Symlink remote file
version                       Show SFTP version
!command                      Execute 'command' in local shell
!                             Escape to local shell
?                             Synonym for help

3. Check Present Working Directory

The command ‘lpwd‘ is used to check the Local present working directory, whereas the pwd command is used to check the Remote working directory.

sftp> lpwd
Local working directory: /
sftp> pwd
Remote working directory: /tecmint/
  • lpwd – print the current directory on your system
  • pwd – print the current directory on the ftp server

4. Listing Files with sFTP

Listing files and directories in local as well as a remote system ftp server.

On Remote
sftp> ls
On Local
sftp> lls

5. Upload File Using sFTP

Put single or multiple files in remote system ftp server.

sftp> put local.profile
Uploading local.profile to /tecmint/local.profile

6. Upload Multiple Files Using sFTP

Putting multiple files on in remote system ftp server.

sftp> mput *.xls

6. Download Files Using sFTP

Getting single or multiple files in a local system.

sftp> get SettlementReport_1-10th.xls
Fetching /tecmint/SettlementReport_1-10th.xls to SettlementReport_1-10th.xls

Get multiple files on a local system.

sftp> mget *.xls

Note: As we can see by default with get command download file in local system with the same name. We can download remote files with a different name by specifying the name at the end. (This applies only while downloading the single file).

7. Switching Directories in sFTP

Switching from one directory to another directory in local and remote locations.

On Remote
sftp> cd test
On Local
sftp> lcd Documents

8. Create Directories Using sFTP

Creating new directories on local and remote locations.

sftp> mkdir test
sftp> lmkdir Documents

9. Remove Directories Using sFTP

Remove directory or file in a remote system.

sftp> rm Report.xls
sftp> rmdir sub1

Note: To remove/delete any directory from a remote location, the directory must be empty.

10. Exit sFTP Shell

The ‘!‘ command drops us in a local shell from where we can execute Linux commands. Type ‘exit‘ command where we can see sftp> prompt return.

sftp> !

[root@sftp ~]# exit
Shell exited with status 1


The SFTP is a very useful tool for administrating servers and transferring files to and from (Local and Remote). We hope this tuts will help you to understand the usage of SFTP to some extent.

If you read this far, tweet to the author to show them you care. Tweet a thanks
Narad Shrestha
He has over 10 years of rich IT experience which includes various Linux Distros, FOSS and Networking. Narad always believes sharing IT knowledge with others and adopts new technology with ease.

Each tutorial at TecMint is created by a team of experienced Linux system administrators so that it meets our high-quality standards.

Join the TecMint Weekly Newsletter (More Than 156,129 Linux Enthusiasts Have Subscribed)
Was this article helpful? Please add a comment or buy me a coffee to show your appreciation.

56 thoughts on “10 sFTP Command Examples to Transfer Files on Remote Servers in Linux”

  1. Hello Experts,

    Any idea how to get latest file on sftp. I have tried with multiple options but it isn’t working:

    # ls -1tr file_name | tail -1

    In local UNIX box above command works perfectly but same when I tried to execute on SFTP it gives complete list and not latest file.

    Is there any specific command that can be used for getting only one latest file out of multiple files

  2. How to resolve this error when connect to sftp?

    Error: Disconnected: No supported authentication methods available (server sent: publickey,gssapi-keyex,gssapi-with-mic)
    Error: Could not connect to server

  3. @Ravi Saive,

    I have got the solution for my issue. Actually the password I was trying to copy past in UNIX box had dollar sign and Euro sign (£$). Whenever I pasted the password these converted into another character (^A). So the password was not identified and failed every time.

    After resetting the password to simple values I am able to login and also transfer the files.

    Thanks again for your Support Ravi.

  4. I am unable to login to a server. I have the username and password and firewall also open but its saying wrong password.

    AZA1UATXXAML004:ef>/ > sftp -oPort=10023 [email protected]
    Connecting to
    SSH Server supporting SFTP and SCP
    Enter password for DTUIT98101UAT
    Enter password for DTUIT98101UAT
    Enter password for DTUIT98101UAT
    Received disconnect from 11: Too many bad authentication attempts!
    Couldn't read packet: Connection reset by peer
      • Yes, while doing telnet I am able to connect to the server

        See below telnet output:

        AZA1UATXXAML004:ef>/ > telnet 10023
        Connected to
        Escape character is '^]'.
        SSH-2.0-SFTP Server

        But when I want to sftp, then its not accepting the password. Yes DTUIT98101UAT is the username.

        However, when I am running below command it seems to be connected.

        lftp sftp://DTUIT98101UAT:[email protected]:10023

        See below:

        AZA1UATXXAML004:ef>/ > lftp sftp://password:@
        lftp [email protected]:~>

        Now when I am trying to use put command, the output something below.

        AZA1UATXXAML004:ef>/opt/itm/data/dbextract/OneCertReport > lftp sftp://DTUIT98101UAT:qw^A48923%%[email protected]:10023
        lftp [email protected]:~> put Fortent_A_PROD.dsv
        put: Login failed: Login incorrect
        lftp [email protected]:~>

        Its not letting me to transfer the files

        • @Chitvan,

          First try to connect to an SFTP session by using following command along with the username and IP address at the command prompt. Once authentication successful, you will see a shell with an sftp>; prompt.

          # sftp [email protected]

          Output would be something like.

          Connecting to
          [email protected]'s password:

          Once you login, try to upload single file using put command as show.

          sftp> put file.txt
          • Thanks Ravi for the reply, but still facing same issue:

            AZA1UATXXAML004:ef>/opt/itm/data/dbextract/OneCertReport > sftp [email protected]
            Connecting to
            ssh: connect to host port 22: Connection timed out
            Couldn't read packet: Connection reset by peer
            AZA1UATXXAML004:ef>/opt/itm/data/dbextract/OneCertReport > sftp [email protected]
            Connecting to
            ssh: connect to host port 22: Connection timed out
            Couldn't read packet: Connection reset by peer
            AZA1UATXXAML004:ef>/opt/itm/data/dbextract/OneCertReport >
  5. Very nice! Works great!

    I do have a problem when downloading multiple files (hundreds). It exits the shell script before finishing to download all files.

    I have to manually connect and download everything (get inbox/*).

    Is there a way to get all files and then have the shell script exit?


Leave a Reply to Oliver Weiler Cancel reply

Thank you for taking the time to share your thoughts with us. We appreciate your decision to leave a comment and value your contribution to the discussion. It's important to note that we moderate all comments in accordance with our comment policy to ensure a respectful and constructive conversation.

Rest assured that your email address will remain private and will not be published or shared with anyone. We prioritize the privacy and security of our users.