11 Linux Kernel Boot-time Parameters Explained

Best Affordable Linux and WordPress Services For Your Business
Outsource Your Linux and WordPress Project and Get it Promptly Completed Remotely and Delivered Online.

If You Appreciate What We Do Here On TecMint, You Should Consider:

  1. Stay Connected to: Twitter | Facebook | Google Plus
  2. Subscribe to our email updates: Sign Up Now
  3. Get your own self-hosted blog with a Free Domain at ($3.45/month).
  4. Become a Supporter - Make a contribution via PayPal
  5. Support us by purchasing our premium books in PDF format.
  6. Support us by taking our online Linux courses

We are thankful for your never ending support.

RedHat RHCE and RHCSA Certification Book
Linux Foundation LFCS and LFCE Certification Preparation Guide

You may also like...

4 Responses

  1. Pandu says:

    Thank you for this post.. We learnt some useful kernel parameters through this..

  2. Roberto C. Sanchez says:

    A few things:

    * Your option #9 “revese” is not actually an option that can be passed to the kernel (I htink you mean “reserve”)

    * Booting from BIOS, regardless of where the kernel is located (CD-ROM, hard drive, floppy, tape, etc.) requires the use of a boot loader because the kernel is too large to fit entirely into the space which the BIOS can see

    * The article does not explain how someone would actually go about passing these options (e.g., edit the kernel command line at the boot loader prompt, edit the configuration and re-install the boot loader)

    * The explanations don’t provide any useful examples (like the mem, console, and reserve options)

    * The explanations leave out relevatively important uses (like using mem to limit the amount of memoery used in a VM host to leave the rest free for guests, like in Xen)

    * You don’t cover how to get the current kernel command line (cat /proc/cmdline)

    The article has potential, but appears to be hastily written and incomplete. Here is an excerpt from an O’Reilly book, which is more complete:


    Of course, the best place to look for information on this is the file Documentation/kernel-parameters.txt in the kernel source distribution, which provides the comprehensive list of hundreds of kernel command line options, along with the format for specifying each one.

  3. shrikant says:

    Thank you :-)

Leave a Reply to Roberto C. Sanchez Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.