How to Install EPEL Repository on RHEL, Rocky & AlmaLinux

In this article, you will learn how to install and enable the EPEL repository on RHEL-based Linux distributions to install additional standard open-source software packages by using YUM and DNF package manager.

What is EPEL

EPEL (Extra Packages for Enterprise Linux) is an open-source and free community-based repository project from the Fedora team which provides 100% high-quality add-on software packages for Linux distribution including RHEL (Red Hat Enterprise Linux), CentOS Stream, AlmaLinux, and Rocky Linux.

EPEL project is not a part of RHEL/CentOS but it is designed for major Linux distributions by providing lots of open-source packages like networking tools, sysadmin tools, programming, monitoring, and so on. Most of the EPEL packages are maintained by the Fedora repo.

Why Do We Use the EPEL Repository?

  1. Provides lots of open-source packages to install via Yum and DNF.
  2. Epel repo is 100% open source and free to use.
  3. It does not provide any core duplicate packages and has no compatibility issues.
  4. All EPEL packages are maintained by the Fedora repo.

How to Install EPEL Repository on RHEL 9 Systems

To install the EPEL repository on any RHEL-based distributions, log in to your server instance as a root user and run the commands as explained below as per your release version.

Install EPEL Repo on RHEL 9

# subscription-manager repos --enable codeready-builder-for-rhel-9-$(arch)-rpms
# dnf install https://dl.fedoraproject.org/pub/epel/epel-release-latest-9.noarch.rpm

Install EPEL Repo on CentOS Stream 9

# dnf config-manager --set-enabled crb
# dnf install epel-release epel-next-release

Install EPEL Repo on AlmaLinux 9

# dnf config-manager --set-enabled crb
# dnf install epel-release

How to Install EPEL Repository on RHEL 8 Systems

To install the EPEL repository on RHEL 8-based release systems, use:

Install EPEL Repo on RHEL 8

# subscription-manager repos --enable codeready-builder-for-rhel-8-$(arch)-rpms
# dnf install https://dl.fedoraproject.org/pub/epel/epel-release-latest-8.noarch.rpm

Install EPEL Repo on CentOS Stream 8

# dnf config-manager --set-enabled powertools
# dnf install epel-release

Install EPEL Repo on Rocky/AlmaLinux 8

# dnf config-manager --set-enabled powertools
# dnf install epel-release

How to Install EPEL Repository on RHEL 7 Systems

Install EPEL Repo on RHEL 7

# subscription-manager repos --enable rhel-*-optional-rpms \
                           --enable rhel-*-extras-rpms \
                           --enable rhel-ha-for-rhel-*-server-rpms
# yum install https://dl.fedoraproject.org/pub/epel/epel-release-latest-7.noarch.rpm

Install EPEL Repo on CentOS 7

# yum install epel-release

Install EPEL Repo on CentOS 6.x

# yum install epel-release

How Do I Verify EPEL Repo?

Now update the software packages and verify the installation of the EPEL repository using the following commands.

# yum update
# rpm -qa | grep epel
Verify Epel Repo Installation
Verify Epel Repo Installation

You can also verify that the EPEL repository is enabled on the system by listing all active repositories using the following command.

# yum repolist
List Yum Repositories
List Yum Repositories

To list the software packages that constitute the EPEL repository, run the command.

# dnf --disablerepo="*" --enablerepo="epel" list available
OR
# yum --disablerepo="*" --enablerepo="epel" list available
List Packages Available from Epel Repo
List Packages Available from Epel Repo

Alternatively, you can use the following grep command to search for individual package names as shown.

# yum --disablerepo="*" --enablerepo="epel" list available | grep 'htop'
OR
# dnf --disablerepo="*" --enablerepo="epel" list available | grep 'monitorix'
Search Packages in EPEL Repo
Search Packages in EPEL Repo

How Do I Use EPEL Repo to Install Packages?

Once the EPEL repository has been successfully installed, a package can be installed using the command.

# dnf --enablerepo="epel" install <package_name>
OR
# yum --enablerepo="epel" install <package_name>

For example, to search and install a package called htop – an interactive Linux process-viewer, run the following command.

# yum --enablerepo=epel info htop
Find Package Info
Find Package Info

Now, to install the Htop package, the command will be.

# yum --enablerepo=epel install htop
Install Package from Epel Repo
Install a Package from Epel Repo

Note: The EPEL configuration file is located under /etc/yum.repos.d/epel.repo.

Conclusion

In this article, you learned how to install the EPEL repository on RHEL-based distributions. We welcome you to try it out and share your feedback in the comment section below.

Hey TecMint readers,

Exciting news! Every month, our top blog commenters will have the chance to win fantastic rewards, like free Linux eBooks such as RHCE, RHCSA, LFCS, Learn Linux, and Awk, each worth $20!

Learn more about the contest and stand a chance to win by sharing your thoughts below!

Ravi Saive
I am an experienced GNU/Linux expert and a full-stack software developer with over a decade in the field of Linux and Open Source technologies

Each tutorial at TecMint is created by a team of experienced Linux system administrators so that it meets our high-quality standards.

Join the TecMint Weekly Newsletter (More Than 156,129 Linux Enthusiasts Have Subscribed)
Was this article helpful? Please add a comment or buy me a coffee to show your appreciation.

206 Comments

Leave a Reply
  1. Does the EPEL Repository stay around after the YUM Repository has reached EOL ??

    I am tired of depending on YUM and being left hanging after YUM reaches EOL, and then being forced to upgrade just to use Yum. Is EPEL a stable alternative to YUM?

    I use my server to solve problems. I’m not into computer systems development.

    I like using Centos, but I don’t like the frequency that new versions come out.

    Thanks,
    Jim

    Reply
  2. Trouble installing gdl on Centos 7 with epel-release, conflict with Python installed library. I updated Centos 7. Installed epel-release 7. when I run gdl is says the following:

    /bin/gdl
    /bin/gdl: relocation error: /bin/gdl: symbol _ZNK8wxWindow7IsShownEv, version WXU_3.0 not defined in file libwx_gtk3u_core-3.0.so.0 with link time reference
    
    Reply
  3. [root@mail mnt]# yum search epel-release
    

    Modular dependency problem:

    Problem: conflicting requests
    – nothing provides module(perl:5.26) needed by module perl-DBI:1.641:8010020191113222731:16b3ab4d-0.x86_64
    =================================== Name Exactly Matched: epel-release
    epel-release.noarch : Extra Packages for Enterprise Linux repository configuration
    [root@mail mnt]# yum info epel-release
    Modular dependency problem:

    Problem: conflicting requests
    – nothing provides module(perl:5.26) needed by module perl-DBI:1.641:8010020191113222731:16b3ab4d-0.x86_64
    Installed Packages
    Name : epel-release
    Version : 8
    Release : 8.el8
    Architecture : noarch
    Size : 32 k
    Source : epel-release-8-8.el8.src.rpm
    Repository : @System
    From repo : epel
    Summary : Extra Packages for Enterprise Linux repository configuration
    URL : http://download.fedoraproject.org/pub/epel
    License : GPLv2
    Description : This package contains the Extra Packages for Enterprise Linux (EPEL) repository
    : GPG key as well as configuration for yum.

    [root@mail mnt]# yum install epel-release
    Error: There are no enabled repositories in “/etc/yum.repos.d”, “/etc/yum/repos.d”, “/etc/distro.repos.d”.
    [root@mail mnt]#

    Reply
  4. I’m unable to install the epel file with the wget command, below is the error I get in my struggle to enable EPEL repo on my RHEL 7.4 server.

    Even though I have internet access on the box.

    --2019-11-19 15:37:19-- (try: 3) http://dl.fedoraproject.org/pub/epel/7/x86_64/e/epel-release-7-5.noarch.rpm
    Connecting to dl.fedoraproject.org (dl.fedoraproject.org)|209.132.181.23|:80... connected.
    HTTP request sent, awaiting a response... Read error (Connection timed out) in headers.
    Retrying
    .

    Any Troubleshooting tips for the above.

    Reply
    • @Abdul,

      Just install the EPEL using the following command.

      # rpm -Uvh https://dl.fedoraproject.org/pub/epel/epel-release-latest-7.noarch.rpm
      
      Reply
  5. I need help, please. I have attempted the install of the epel repo, it says it’s already there, but whenever I do a yum update, I get a bunch of these

    http://mirror.grid.uchicago.edu/pub/linux/epel/7/x86_64/repodata/repomd.xml.asc: [Errno 14] HTTP Error 404 - Not Found
    https://mirror.umd.edu/fedora/epel/7/x86_64/repodata/repomd.xml.asc: [Errno 14] HTTPS Error 404 - Not Found
    https://mirrors.sonic.net/epel/7/x86_64/repodata/repomd.xml.asc: [Errno 14] HTTPS Error 404 - Not Found
    https://muug.ca/mirror/fedora-epel/7/x86_64/repodata/repomd.xml.asc: [Errno 14] HTTPS Error 404 - Not Found
    https://ord.mirror.rackspace.com/epel/7/x86_64/repodata/repomd.xml.asc: [Errno 14] HTTPS Error 404 - Not Found
    http://mirror.nodesdirect.com/epel/7/x86_64/repodata/repomd.xml.asc: [Errno 14] HTTP Error 404 - Not Found
    https://mirror.steadfastnet.com/epel/7/x86_64/repodata/repomd.xml.asc: [Errno 14] HTTPS Error 404 - Not Found
    http://mirror.rnet.missouri.edu/epel/7/x86_64/repodata/repomd.xml.asc: [Errno 14] HTTP Error 404 - Not Found
    http://fedora-epel.mirror.lstn.net/7/x86_64/repodata/repomd.xml.asc: [Errno 14] HTTP Error 404 - Not Found
    https://d2lzkl7pfhq30w.cloudfront.net/pub/epel/7/x86_64/repodata/repomd.xml.asc: [Errno 14] HTTPS Error 404 - Not Found
    http://mirror.oss.ou.edu/epel/7/x86_64/repodata/repomd.xml.asc: [Errno 14] HTTP Error 404 - Not Found
    https://dfw.mirror.rackspace.com/epel/7/x86_64/repodata/repomd.xml.asc: [Errno 14] HTTPS Error 404 - Not Found
    https://mirror.dal.nexril.net/fedora-epel/7/x86_64/repodata/repomd.xml.asc: [Errno 14] HTTPS Error 404 - Not Found
    https://pubmirror2.math.uh.edu/fedora-buffet/epel/7/x86_64/repodata/repomd.xml.asc: [Errno 14] HTTPS Error 404 - Not Found

    I don’t actually see the files when I navigate to those locations separately. Can you help, please?

    Thank you!
    Sondra

    Reply
    • @Sondra,

      The following commands will fix this issue..

      # yum clean all
      # yum makecache
      # yum update
      

      If you still see errors, make sure to have repo_gpgcheck is set to 0 in yum.conf file for CentOS.

      Reply
      • Thank you! Turning off the repo gpg check worked. In regards to the security posture of epel, do you think they’ll fix it upstream, soon? Or do I need to get in on the Wednesday meeting to report that I think there’s a change that needs to be made?

        Reply
  6. Please, I keel seeing this error after enabling EPEL repository so I can be able to install “terminator”. How can I fix this?

    Preparing...                ########################################### [100%]
            package epel-release-6-8.noarch is already installed
    
    [root@federalreservebank ~]# yum repolist
    Loaded plugins: product-id, security, subscription-manager
    This system is not registered to Red Hat Subscription Management. You can use subscription-manager to register.
    Error: Cannot retrieve metalink for repository: epel. Please verify its path and try again
    
    Reply
  7. Very good article, but don’t you miss one step of editing epel.repo file. By default, the baseline has # at beginning need to uncomment it in order to work repository.

    Reply
  8. # yum -y install openvpn easy-rsa net-tools bridge-utils
    

    Loaded plugins: fastestmirror, langpacks
    Loading mirror speeds from cached hostfile
    * epel: del-repos.extreme-ix.org
    Package net-tools-2.0-0.17.20131004git.el7.x86_64 already installed and latest version
    Package bridge-utils-1.5-9.el7.x86_64 already installed and latest version
    Resolving Dependencies
    –> Running transaction check
    —> Package easy-rsa.noarch 0:3.0.3-1.el7 will be installed
    —> Package openvpn.x86_64 0:2.4.6-1.el7 will be installed
    –> Processing Dependency: libcrypto.so.10(OPENSSL_1.0.2)(64bit) for package: openvpn-2.4.6-1.el7.x86_64
    –> Processing Dependency: libpkcs11-helper.so.1()(64bit) for package: openvpn-2.4.6-1.el7.x86_64
    –> Processing Dependency: liblz4.so.1()(64bit) for package: openvpn-2.4.6-1.el7.x86_64
    –> Running transaction check
    —> Package lz4.x86_64 0:1.7.3-1.el7 will be installed
    —> Package openvpn.x86_64 0:2.4.6-1.el7 will be installed
    –> Processing Dependency: libcrypto.so.10(OPENSSL_1.0.2)(64bit) for package: openvpn-2.4.6-1.el7.x86_64
    —> Package pkcs11-helper.x86_64 0:1.11-3.el7 will be installed
    –> Finished Dependency Resolution
    Error: Package: openvpn-2.4.6-1.el7.x86_64 (epel)
    Requires: libcrypto.so.10(OPENSSL_1.0.2)(64bit)
    You could try using –skip-broken to work around the problem
    You could try running: rpm -Va –nofiles –nodigest
    [root@server ~]#

    Reply
  9. Please resolve my Issue.

    [root@static-host ~]# yum install cacti
    Loaded plugins: fastestmirror, langpacks
    Loading mirror speeds from cached hostfile
    * base: repo.inara.pk
    * epel: sg.fedora.ipserverone.com
    * extras: repo.inara.pk
    * updates: repo.inara.pk
    Resolving Dependencies
    –> Running transaction check
    —> Package cacti.noarch 0:1.1.19-2.el6 will be installed
    –> Processing Dependency: php-imap for package: cacti-1.1.19-2.el6.noarch
    –> Finished Dependency Resolution
    Error: Package: cacti-1.1.19-2.el6.noarch (epel)
    Requires: php-imap
    You could try using –skip-broken to work around the problem
    You could try running: rpm -Va –nofiles –nodigest

    Reply
    • @Anis,

      Try these following installation instructions to install Cacti on CentOS 6.

      Download latest epel-release rpm from

      # wget https://dl.fedoraproject.org/pub/epel/6/i386/epel-release-6-8.noarch.rpm
      

      Install epel-release rpm:

      # rpm -Uvh epel-release*rpm
      

      Install cacti rpm package:

      # yum install cacti
      
      Reply
  10. Sir, Please solve my problem.

    I am using RHEL7 inside the VMVare. I am getting the same error while enabling the EPEL repository.

    I have installed “epel-release-7-11.noarch”, Now i am updating my repository but i am not able to do it.

    I can’t use internet inside the VMVare.

    When i run command for enabling epel repository “yum update curl nss nss-util nspr” still it not able show repo of epel.

    When i run this command “yum-config-manager –enable epel” still after run that when i run yum repolist, still it not showing me desired result.

    Please solve my problem. So that i can use NRPE on my client machine.

    It would be helpful to me.

    Reply
  11. Nice article, If we do not have internet on the server. How can we install and configure *epel*? Suppose my desktop is windows and I’ll connect to the server through putty and my servers are in private network. Is there any possible way that we can download all epel rpms and do some kind of local repo config?

    Reply
  12. # git clone https://github.com/ansible/ansible.git --recursive
    Cloning into 'ansible'...
    

    fatal: unable to access ‘https://github.com/ansible/ansible.git/’: Peer reports incompatible or unsupported protocol version.

    while get the repo from latest source we are getting the above error in redhat7.

    Reply
    • @Manikandan,

      Some old NSS is used for SSL within cURL library when you download any package from the web, so it’s rejected. In such case, updating curl combined with nss update will help you..

      # yum update curl nss nss-util nspr
      

      Hope this helps!

      Reply
  13. Hi! All

    I am trying to Enable EPEL Repository in (_64 x86_64 x86_64 GNU/Linux)

    I am getting below erros please help me

    ThankQ

    # RHEL/CentOS 6 64-Bit ##

    # wget http://dl.fedoraproject.org/pub/epel/6/x86_64/epel-release-6-8.noarch.rpm

    # rpm -ivh epel-release-6-8.noarch.rpm

    [root@Bhargav Talla ~]# yum repolist

    Loaded plugins: product-id, refresh-packagekit, security, subscription-manager
    Updating certificate-based repositories.
    Error: Cannot retrieve metalink for repository: epel. Please verify its path and try again

    [root@Bhargav Talla ~]#

    [root@Bhargav Talla ~]# yum –enablerepo=epel info zabbix

    Loaded plugins: product-id, refresh-packagekit, security, subscription-manager
    Updating certificate-based repositories.
    Error: Cannot retrieve repository metadata (repomd.xml) for repository: epel. Please verify its path and try again

    [root@Bhargav Talla ~]# yum –enablerepo=epel install zabbix

    Loaded plugins: product-id, refresh-packagekit, security, subscription-manager
    Updating certificate-based repositories.
    Error: Cannot retrieve repository metadata (repomd.xml) for repository: epel. Please verify its path and try again

    Note: The epel configuration file is located under /etc/yum.repos.d/epel.repo.

    Reply
    • First clear Yum cache as shown.

      # yum clean all && yum makecache
      

      You may come across such error, after installing epel-release. The quick fix is to update your SSL certificates:

      # yum -y upgrade ca-certificates
      
      Reply
  14. I am having one doubt, in my interview interviewer asked that you configured yum server and you are having 3700 Packages in your local machine now you need to add extra 200 packages how?

    Please need help..

    Reply
    • @Rene,

      I totally agree both CentOS 4 and CentOS 5 are dead, even epel repository don’t have any packages for it, all links are dead. And also I have updated the article by removing CentOS 5 and 4 links.

      Reply
  15. unable install openstack in rhel 7…
    got error while installing ( #yum install openstack-packstack) :
    Error: Package: 1:openstack-packstack-10.0.1-1.el7.noarch (openstack-ocata)
    Requires: python-docutils
    You could try using –skip-broken to work around the problem
    You could try running: rpm -Va –nofiles –nodigest

    Kindly help …!!!!

    Reply
  16. Hi,

    I got an error after issuing this command: yum –enablerepo=epel install phpmyadmin
    Could you help me please?

    Error: Package: php-tcpdf-6.2.13-1.el6.noarch (epel)
    Requires: php-posix
    Error: Package: php-tcpdf-6.2.13-1.el6.noarch (epel)
    Requires: php-bcmath
    Error: Package: php-tcpdf-6.2.13-1.el6.noarch (epel)
    Requires: php-tidy
    Error: Package: phpMyAdmin-4.0.10.19-1.el6.noarch (epel)
    Requires: php-mbstring
    Error: Package: php-php-gettext-1.0.12-1.el6.noarch (epel)
    Requires: php-mbstring
    Error: Package: php-tcpdf-6.2.13-1.el6.noarch (epel)
    Requires: php-mbstring
    You could try using –skip-broken to work around the problem
    ** Found 1 pre-existing rpmdb problem(s), ‘yum check’ output follows:
    SECU_PROD-2-1.i386 has missing requires of /usr/bin/sh

    Reply
  17. Sir, I found error.

    This system is registered to Red Hat Subscription Management, but is not receiving updates. You can use subscription-manager to assign subscriptions.
    No package zabbix available.
    Error: Nothing to do

    what I do? please help me.

    Reply
  18. Nice, i was trying for packages for RHEL 7, it worked well for me.
    Thank you Ravi Saive. Also thanks to other for queries it helps others too.

    Reply
      • I am trying to install squid proxy in RHEL7 OS but the output it is giving is

        [root@localhost ~]# yum install squid*
        Loaded plugins: langpacks, product-id, subscription-manager
        This system is not registered to Red Hat Subscription Management. You can use subscription-manager to register.
        Existing lock /var/run/yum.pid: another copy is running as pid 3868.
        Another app is currently holding the yum lock; waiting for it to exit...
          The other application is: yum
            Memory :  34 M RSS (472 MB VSZ)
            Started: Wed Mar  8 08:27:53 2017 - 05:54 ago
            State  : Traced/Stopped, pid: 3868
        
        
        
        and before this error it was showing 
        
        failure: repodata/repomd.xml from squid: [Errno 256] No more mirrors to try.
        http://www1.ngtech.co.il/repo/centos/7Server/x86_64/repodata/repomd.xml: [Errno 14] HTTP Error 404 – Not Found
        

        How to resolve this issue to install squid proxy ?

        Reply
        • @Jaya,

          First remove the ngtech repo from /etc/yum.repos directory, then kill the yum with pkill command.

          # rm -rf /etc/yum.repos.d/ngetch.repo
          # pkill yum
          

          Then try to install squid with yum, I hope this time squid will install without any issues..

          Reply
  19. I got the error
    [root@jp1_redhat ansi]# yum repolist
    Loaded plugins: product-id, rhnplugin, security, subscription-manager
    This system is receiving updates from Red Hat Subscription Management.
    This system is receiving updates from RHN Classic or RHN Satellite.
    Error: xz compression not available
    [root@jp1_redhat ansi]#

    Reply
    • @Prakash,

      I think you’ve installed non-CentOS version of xz package, first remove it.

      # yum remove xz
      

      And then re-install from the default repositories as shown.

      # yum install xz
      

      I hope it will fix this issue…

      Reply
    • @Priya,

      Please add the DNS Name Servers in /etc/hosts file, if you don’t know DNS, then you can add following line to this file.

      nameserver 8.8.8.8
      
      Reply
  20. This no longer works if I enter the commands for installation on CentOS 7.
    # wget http://dl.fedoraproject.org/pub/epel/7/x86_64/e/epel-release-7-8.noarch.rpm
    # rpm -ivh epel-release-7-8.noarch.rpm
    The download works but then when ever I run yum I get this unknown repo message I do not know how to get rid of and I do not have access the the epel repo

    Loaded plugins: fastestmirror, langpacks
    epel/i386/metalink | 40 kB 00:00:00
    Could not parse metalink https://mirrors.fedoraproject.org/metalink?repo=epel-7&arch=i386 error was
    No repomd file

    One of the configured repositories failed (Unknown),
    and yum doesn’t have enough cached data to continue. At this point the only
    safe thing yum can do is fail. There are a few ways to work “fix” this:

    1. Contact the upstream for the repository and get them to fix the problem.

    2. Reconfigure the baseurl/etc. for the repository, to point to a working
    upstream. This is most often useful if you are using a newer
    distribution release than is supported by the repository (and the
    packages for the previous distribution release still work).

    3. Disable the repository, so yum won’t use it by default. Yum will then
    just ignore the repository until you permanently enable it again or use
    –enablerepo for temporary usage:

    yum-config-manager –disable

    4. Configure the failing repository to be skipped, if it is unavailable.
    Note that yum will try to contact the repo. when it runs most commands,
    so will have to try and fail each time (and thus. yum will be be much
    slower). If it is a very temporary problem though, this is often a nice
    compromise:

    yum-config-manager –save –setopt=.skip_if_unavailable=true

    File /var/cache/yum/i386/7/epel/metalink.xml does not exist

    Reply
  21. Pingback: EasyTAG: A Tool for Viewing and Editing Tags in Audio and Video Files
  22. IF Your graph is not showing just change the TIME ZONE under vi /etc/php.ini

    I faced the issue because my system time zone and cacti time is different .

    Reply
  23. @Ravi,
    I am not able to install Mysql on centos6.4 ??

    Getting Error
    sudo yum install mysql-server-5.5
    Loaded plugins: product-id, security, subscription-manager
    This system is not registered to Red Hat Subscription Management. You can use subscription-manager to register.
    Setting up Install Process
    No package mysql-server-5.5 available.
    Error: Nothing to do

    Reply
  24. Pingback: Nmon: Analyze and Monitor Linux System Performance
  25. After installing of
    [root@vkcdpl rpmfusion]# rpm -ivh epel-release-6-8.noarch.rpm
    warning: epel-release-6-8.noarch.rpm: Header V3 RSA/SHA256 Signature, key ID 0608b895: NOKEY
    Preparing… ########################################### [100%]
    1:epel-release ########################################### [100%]
    yum not working in my rhel 6
    [root@vkcdpl rpmfusion]# yum repolist
    Loaded plugins: product-id, refresh-packagekit, security, subscription-manager
    This system is not registered to Red Hat Subscription Management. You can use subscription-manager to register.
    Error: Cannot retrieve metalink for repository: epel. Please verify its path and try again
    [root@vkcdpl rpmfusion]# yum list
    Loaded plugins: product-id, refresh-packagekit, security, subscription-manager
    This system is not registered to Red Hat Subscription Management. You can use subscription-manager to register.
    Error: Cannot retrieve repository metadata (repomd.xml) for repository: epel. Please verify its path and try again

    kindly explain me

    Reply
  26. Pingback: SSHFS - Secure SHell FileSystem for Mounting Remote Filesystems
  27. Pingback: How to Setup RackTables, a Datacenter and Server Room Asset Management for Linux
  28. Pingback: How to Use 'Axel' as Download Accelerator to Speed Up FTP and HTTP Downloads
    • @Ameya,

      I totally agreed to your point, yes we should update the repository after installing to bring the software packages to latest version.

      Reply
  29. Pingback: Setting Up Real-Time Monitoring with 'Ganglia' for Grids and Clusters of Linux Servers
  30. Pingback: Smem - Reports Memory Consumption Per-Process and Per-User Basis in Linux
  31. Pingback: Install Latest Nodejs and NPM Version in Linux Systems

Got Something to Say? Join the Discussion...

Thank you for taking the time to share your thoughts with us. We appreciate your decision to leave a comment and value your contribution to the discussion. It's important to note that we moderate all comments in accordance with our comment policy to ensure a respectful and constructive conversation.

Rest assured that your email address will remain private and will not be published or shared with anyone. We prioritize the privacy and security of our users.