Tecmint: Linux Howtos, Tutorials & Guides

How to Install Ubuntu via PXE Server Using Local DVD Sources

Install Ubuntu via PXE Using Local DVD

PXE or Preboot eXecution Environment is a server-client mechanism which instructs a client machine to boot form network.

In this guide we’ll show how to install Ubuntu Server via a PXE server with local HTTP sources mirrored from Ubuntu server ISO image via Apache web server. The PXE server used in this tutorial is Dnsmasq Server.

Requirements:

  1. Ubuntu Server 16.04 or 17.04 Installation
  2. A network interface configured with Static IP address
  3. Ubuntu Server 16.04 or 17.04 ISO image

Step 1: Install and Configure DNSMASQ Server

1. In order to setup the PXE server, on the first step login with the root account or an account with root privileges and install Dnsmasq package in Ubuntu by issuing the following command.

# apt install dnsmasq

2. Next, backup dnsmasq main configuration file and then start editing the file with the following configurations.

# mv /etc/dnsmasq.conf /etc/dnsmasq.conf.backup
# nano /etc/dnsmasq.conf

Add the following configuration to dnsmasq.conf file.

interface=ens33,lo
bind-interfaces
domain=mypxe.local

dhcp-range=ens33,192.168.1.230,192.168.1.253,255.255.255.0,1h
dhcp-option=3,192.168.1.1
dhcp-option=6,192.168.1.1
dhcp-option=6,8.8.8.8
server=8.8.4.4
dhcp-option=28,10.0.0.255
dhcp-option=42,0.0.0.0

dhcp-boot=pxelinux.0,pxeserver,192.168.1.14

pxe-prompt="Press F8 for menu.", 2
pxe-service=x86PC, "Install Ubuntu 16.04 from network server 192.168.1.14", pxelinux
enable-tftp
tftp-root=/srv/tftp

On the above configuration file replace the following lines accordingly.

3. Also, after you’ve finished editing the dnsmasq configuration file, create the directory for the PXE netboot files by issuing the below command and restart dnsmasq daemon to apply changes. Check dnsmasq service status to see if it has been started.

# mkdir /srv/tftp
# systemctl restart dnsmasq.service
# systemctl status dnsmasq.service

Step 2: Install TFTP Netboot Files

4. On the next step grab the latest version of Ubuntu server ISO image for 64-bit architecture by issuing the following command.

# wget http://releases.ubuntu.com/16.04/ubuntu-16.04.3-server-amd64.iso

5. After Ubuntu server ISO has been downloaded, mount the image in /mnt directory and list the mounted directory content by running the below commands.

# mount -o loop ubuntu-16.04.3-desktop-amd64.iso /mnt/
# ls /mnt/

Verify Ubuntu ISO Files

6. Next, copy the netboot files from Ubuntu mounted tree to tftp system path by issuing the below command. Also, list tftp system path to see the copied files.

# cp -rf /mnt/install/netboot/* /srv/tftp/
# ls /srv/tftp/

Copy and Verify TFTP Files

Step 3: Prepare Local Installation Source Files

7. The local network installation sources for Ubuntu server will be provided via HTTP protocol. First, install, start and enable Apache web server by issuing the following commands.

# apt install apache2
# systemctl start apache2
# systemctl status apache2
# systemctl enable apache2

8. Then, copy the content of the mounted Ubuntu DVD to Apache web server web root path by executing the below commands. List the content of Apache web root path to check if Ubuntu ISO mounted tree has been completely copied.

# cp -rf /mnt/* /var/www/html/
# ls /var/www/html/

9. Next, open HTTP port in firewall and navigate to your machine IP address via a browser (http://192.168.1.14/ubuntu) in order to test if you can reach sources via HTTP protocol.

# ufw allow http

Check HTTP Ubuntu Sources

Step 4: Setup PXE Server Configuration File

10. In order to be able to pivot the rootfs via PXE and local sources, Ubuntu needs to be instructed via a preseed file. Create the following local-sources.seed file in your web server document root path with the following content.

# nano /var/www/html/ubuntu/preseed/local-sources.seed

Add following line to local-sources.seed file.

d-i live-installer/net-image string http://192.168.1.14/ubuntu/install/filesystem.squashfs

Here, make sure you replace the IP address accordingly. It should be the IP address where web resources are located. In this guide the web sources, the PXE server and TFTP server are hosted on the same system. In a crowded network you might want to run PXE, TFTP and web services on separate machines in order to improve PXE network speed.

11. A PXE Server reads and executes configuration files located in pxelinux.cfg TFTP root directory in this order: GUID files, MAC files and default file.

The directory pxelinux.cfg is already created and populated with the required PXE configuration files because we’ve earlier copied the netboot files from Ubuntu mounted ISO image.

In order to add the above preseed statement file to Ubuntu installation label in PXE configuration file, open the following file for editing by issuing the below command.

# nano /srv/tftp/ubuntu-installer/amd64/boot-screens/txt.cfg

In Ubuntu PXE txt.cfg configuration file replace the following line as illustrated in the below excerpt.

append auto=true url=http://192.168.1.14/ubuntu/preseed/local-sources.seed vga=788 initrd=ubuntu-installer/amd64/initrd.gz --- quiet

The /srv/tftp/ubuntu-installer/amd64/boot-screens/txt.cfg file should have the following global content:

default install
label install
menu label ^Install Ubuntu 16.04 with Local Sources
menu default
kernel ubuntu-installer/amd64/linux
append auto=true url=http://192.168.1.14/ubuntu/preseed/local-sources.seed vga=788 initrd=ubuntu-installer/amd64/initrd.gz --- quiet 
label cli
menu label ^Command-line install
kernel ubuntu-installer/amd64/linux
append tasks=standard pkgsel/language-pack-patterns= pkgsel/install-language-support=false vga=788 initrd=ubuntu-installer/amd64/initrd.gz --- quiet

12. In case you want to add the preseed url statement to Ubuntu Rescue menu, open the below file and make sure you update the content as illustrated in the below example.

# nano /srv/tftp/ubuntu-installer/amd64/boot-screens/rqtxt.cfg

Add the followng configuration to rqtxt.cfg file.

label rescue
menu label ^Rescue mode
kernel ubuntu-installer/amd64/linux
append auto=true url=http://192.168.1.14/ubuntu/preseed/local-sources.seed vga=788 initrd=ubuntu-installer/amd64/initrd.gz rescue/enable=true --- quiet

The important line you should update is url=http://192.168.1.14/ubuntu/preseed/local-sources.seed which specifies the URL address where the pressed file is located in your network.

13. Finally, open Ubuntu pxe menu.cfg file and comment the first three lines in order to expand the PXE boot screen as illustrated in the below screenshot.

# nano /srv/tftp/ubuntu-installer/amd64/boot-screens/menu.cfg

Comment these three following lines.

#menu hshift 13
#menu width 49
#menu margin 8

PXE Menu Configuration

Step 5: Open Firewall Ports in Ubuntu

14. Execute netstat command with root privileges to identify dnsmasq, tftp and web open ports in listening state on your server as illustrated in the below excerpt.

# netstat -tulpn

Verify Open Ports

15. After you’ve identified all required ports, issue the below commands to open the ports in ufw firewall.

# ufw allow 53/tcp
# ufw allow 53/udp
# ufw allow 67/udp
# ufw allow 69/udp
# ufw allow 4011/udp

Step 6: Install Ubuntu with Local Sources via PXE

16. To install Ubuntu server via PXE and use the local network installation sources, reboot your machine client, instruct the BIOS to boot from network and at the first PXE menu screen choose the first option as illustrated in the below images.

Select Network Boot

Select PXE Boot Option

Install Ubuntu using PXE

17. The installation procedure should be performed as usual. When the installer reaches the Ubuntu archive mirror country setup, use the up keyboard arrow to move to the first option, which says: enter information manually.

Select Ubuntu Mirror Archive

18. Press [enter] key to update this option, delete the mirror string and add the IP address of the web server mirror sources and press enter to continue as illustrated in the below image.

http://192.168.1.14

Enter Ubuntu Mirror Archive Hostname

19. On the next screen, add your mirror archive directory as shown below and press enter key to continue with the installation process and usually.

/ubuntu

Select Ubuntu Mirror Archive Directory

20. In case you want to see information about what packages are downloaded from your network local mirror, press [CTRL+ALT+F2] keys in order to change machine virtual console and issue the following command.

# tail –f /var/log/syslog

Check Network Mirror Logs

21. After the installation of the Ubuntu server finishes, login to the newly installed system and run the following command with root privileges in order to update the repositories packages from local network sources to official Ubuntu mirrors.

The mirrors needs to be changed in order to update the system using the internet repositories.

$ sudo sed –i.bak ‘s/192.168.1.14/archive.ubuntu.com/g’ /etc/apt/sources.list

Change Ubuntu Network Sources

Assure you replace the IP address according to the IP address of your own web local sources.

Official Ubuntu Network Sources

That’s all! You can now update your Ubuntu server system and install all required software. Installing Ubuntu via PXE and a local network source mirror can improve the installation speed and can save internet bandwidth and costs in case of deploying a large number of servers in a short period of time at your premises.